Laser Hybrid Welding of Aluminized Coated Boron Steel for Automotive Body Construction
Authors:
- 14 April 2008
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
The automotive industry is in constant pursuit of alternative materials and processes to address the ever changing needs of their customer and the environment. This paper presents findings from a study using a laser hybrid process (laser with MIG) to join aluminum-silicon coated boron steel (USIBOR). In this report the influence of heat from the laser hybrid welding process and its effect on the coated boron steel is discussed. In order to understand the affect from laser hybrid joining process, bead on plate experiments were conducted using 1.0 mm, 1.6 mm and 2.0 mm thick coupons. Further, two lap joint configurations were also investigated using the 1.6 mm and 2.0 mm thick coupons. Based on the test results, a significant reduction in tensile strength was observed at the Heat Affected Zone (HAZ).Keywords
This publication has 3 references indexed in Scilit:
- Effect of Materials Stack-ups and Microhardness Distribution on Fatigue Performance of DP600 and Boron Steel GMAW Lap JointSAE International Journal of Advances and Current Practices in Mobility, 2007
- Effect of Materials Stack-ups on Fatigue Performance of DP780 and Aluminized Coated Boron Steel GMAW Lap JointSAE International Journal of Advances and Current Practices in Mobility, 2007
- Effect of Weld Geometry and HAZ Softening on Fatigue Performance of DP780 GMAW Lap JointSAE International Journal of Advances and Current Practices in Mobility, 2007