Capability to detect and localize typical defects of laser powder bed fusion (L-PBF) process: an experimental investigation with different non-destructive techniques
Authors:
- Ester D’aCcardiEster D’aCcardi
- Rainer KrankenhagenRKRainer Krankenhagen
- Alexander UlbrichtAUAlexander Ulbricht
- Matthias PelknerMPMatthias Pelkner
- Rainer PohlRPRainer Pohl
- Davide PalumboDPDavide Palumbo
- Umberto GaliettiUmberto Galietti
Open Access
- 19 April 2022
- journal article
- research article
- Published by Springer Nature in Progress in Additive Manufacturing
- Vol. 7 (6) , 1239-1256
Abstract
Additive manufacturing (AM) technologies, generally called 3D printing, are widely used because their use provides a high added value in manufacturing complex-shaped components and objects. Defects may occur within the components at different time of manufacturing, and in this regard, non-destructive techniques (NDT) represent a key tool for the quality control of AM components in many industrial fields, such as aerospace, oil and gas, and power industries. In this work, the capability of active thermography and eddy current techniques to detect real imposed defects that are representative of the laser powder bed fusion process has been investigated. A 3D complex shape of defects was revealed by a µCT investigation used as reference results for the other NDT methods. The study was focused on two different types of defects: porosities generated in keyhole mode as well as in lack of fusion mode. Different thermographic and eddy current measurements were carried out on AM samples, providing the capability to detect volumetric irregularly shaped defects using non-destructive methods.Keywords
This publication has 38 references indexed in Scilit:
- Additive manufacturing of metallic components – Process, structure and propertiesProgress in Materials Science, 2018
- Comparison of quantitative defect characterization using pulse-phase and lock-in thermographyApplied Optics, 2016
- Assessment of the effect of defects on mechanical properties of adhesive bonded joints by using non destructive methodsComposites Part B: Engineering, 2016
- Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturingJournal of Materials Processing Technology, 2014
- Defect Characterization Based on Eddy Current Technique: Technical ReviewAdvances in Mechanical Engineering, 2014
- Non-Destructive Techniques Based on Eddy Current TestingSensors, 2011
- Deep Penetrating Eddy Currents and ProbesMaterials Testing, 2007
- Defect depth retrieval from pulsed phase thermographic data on Plexiglas and aluminum samples2004
- Defect detection in thick aircraft samples based on HTS SQUID-magnetometry and pattern recognitionIEEE Transactions on Applied Superconductivity, 2003
- Pulse phase thermography for defect detection and visualization1999