Feasibility of Ethylene‐Vinyl Acetate ( EVA ) for Additive Manufacturing of Mouthguards: Influence of Natural Fiber and Polymer Reinforcement
- 3 June 2026
- journal article
- research article
- Published by Wiley in Dental Traumatology
Abstract
Objectives: This study aimed to evaluate the feasibility of using ethylene‐vinyl acetate (EVA) for extrusion‐based additive manufacturing, focusing on its potential application in mouthguard fabrication. Additionally, the influence of reinforcement with ramie fiber and polycyclohexylene dimethylene terephthalate (PCT) on the mechanical and structural properties of EVA‐based composites is evaluated. Materials and Methods: EVA served as the polymer matrix and combined with two reinforcing phases: Short ramie fibers ( Boehmeria nivea ) and PCT copolyester. Composites were prepared with reinforcement contents of 10%, 20%, 30%, 40%, and 50% (w/w). The materials through density apparent measurements, tensile testing, and morphological analysis using scanning electron microscopy (SEM) to evaluate the influence of reinforcement on mechanical performance and structural behavior. Results: Neat EVA exhibited high ductility but limited tensile strength, which may restrict its direct use in extrusion‐based additive manufacturing. The incorporation of PCT increased tensile strength to higher concentrations, reaching 9.3 MPa at 50% reinforcement, although with a significant reduction in elongation. Ramie fiber reinforcement produced a more pronounced improvement in mechanical performance, with tensile strength reaching 19 MPa at 40% fiber content while maintaining part of the material's ductile characteristics. SEM analysis revealed biphasic morphology in EVA/PCT blends and a homogeneous fiber distribution in EVA/ramie composites. Conclusion: The results indicate that neat EVA alone may not provide sufficient mechanical stability for additive manufacturing processes. However, reinforcement with ramie fiber or PCT significantly improves the mechanical performance of EVA‐based composites. Among the evaluated formulations, ramie fiber reinforcement showed the most favorable balance between strength and ductility, suggesting potential for the development of flexible materials suitable for additive manufacturing and future application in customized mouthguard fabrication.Keywords
This publication has 42 references indexed in Scilit:
- Experimental Evaluation of Mechanical Properties, Thermal Analysis, Morphology, Printability, and Shape Memory Performance of the Novel 3D Printed PETG‐EVA BlendsMacromolecular Materials and Engineering, 2024
- 4D Printing of novel poly(ethylene-vinyl acetate) / poly(butyl methacrylate-co-isobutyl methacrylate) shape memory polymer blendsApplied Materials Today, 2024
- Investigation on using graphite filler for 3D printing of flexible electrically conductive polymer by extrusion‐based additive manufacturingPolymer Engineering & Science, 2023
- 3D printing fabrication of Ethylene-Vinyl Acetate (EVA) based intravaginal rings for antifungal therapyJournal of Drug Delivery Science and Technology, 2023
- Quasi-static penetration property of 3D printed woven-like ramie fiber reinforced biocompositesComposite Structures, 2022
- EVA-PVA binder system for polymer derived mullite made by material extrusion based additive manufacturingJournal of the European Ceramic Society, 2022
- Materials Requirements in Fused Filament Fabrication: A Framework for the Design of Next‐Generation 3D Printable Thermoplastics and CompositesMacromolecular Materials and Engineering, 2022
- Fabrication and characteristics of flexible thermoplastic polyurethane filament for fused deposition modeling three‐dimensional printingPolymer Engineering & Science, 2022
- Investigation on dynamic strength of 3D‐printed continuous ramie fiber reinforced biocomposites at various strain rates using machine learning methodsPolymer Composites, 2022
- The application of the synergistic effect between the crystal structure of poly(lactic acid) (PLA) and the presence of ethylene vinyl acetate copolymer (EVA) to produce highly ductile PLA/EVA blendsJournal of Thermal Analysis and Calorimetry, 2019