The Inclusion of In-Plane Stresses in Delamination Criteria
Authors:
- 1 August 2001
- journal article
- research article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 35 (15) , 1325-1342
Abstract
Delamination is characterized as the failure of the interply resin-rich region. The interply resin layers are modeled and the six component stress state is determined using a finite element analysis. The Modified von Mises Delamination Criterion using both the in-plane and interlaminar stresses is developed and applied to the average stress state within 1.75 ply thicknesses of the edge. The MVMDC shows good correlation to experimental data as well as to other criteria. TheMVMDCis not sensitive to the thickness of the interply resin layer. Instead it is merely the presence of such a layer and the stresses that result in the layer that can indicate delamination failure of a laminate. Thus consideration of the full stress state in the failure of the interply resin layer is valid and indicates the potential for interaction between the in-plane loading and delamination.Keywords
This publication has 29 references indexed in Scilit:
- Structural Tailoring Techniques to Prevent Delamination in Composite LaminatesJournal of the American Helicopter Society, 1990
- Quadratic Stress Criterion for Initiation of DelaminationJournal of Composite Materials, 1988
- Experimental and Analytical Studies On the Onset of Delamination in Laminated CompositesJournal of Composite Materials, 1984
- On the Relationship between Engineering Properties and Delamination of Composite MaterialsJournal of Composite Materials, 1981
- Stress Fracture Criteria for Laminated Composites Containing Stress ConcentrationsJournal of Composite Materials, 1974
- On the Calculation of Interlaminar Normal Stress in Composite LaminateJournal of Composite Materials, 1974
- Some observations on the interlaminar strength of composite laminatesInternational Journal of Mechanical Sciences, 1973
- Free-Edge Delamination of Tensile CouponsJournal of Composite Materials, 1972
- Moiré Analysis of the Interlaminar Shear Edge Effect in Laminated CompositesJournal of Composite Materials, 1971
- Interlaminar Shear in Laminated Composites Under Generalized Plane StressJournal of Composite Materials, 1970