Analytical stress intensity factors and Jk‐integrals of periodic and collinear interface cracks between dissimilar orthotropic materials
Author:
Open Access
- 17 November 2020
- journal article
- research article
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 44 (2) , 317-332
Abstract
This paper introduces an analytical expression for the stress intensity factors at the crack tips of a row of periodic and collinear cracks between infinite dissimilar orthotropic materials. The analytical Jk‐integrals of these traction‐free cracks have been presented for different material combinations, ‘crack length’/‘interval width’ ratios (λ) and various in‐plane loading conditions. Some of the analytical Jk‐integrals have been compared with the numerical values computed using the boundary element crack shape sensitivities which are in good agreement. For any in‐plane loading condition of a bimaterial plate with periodic and collinear interface cracks, the normalised J1‐integral is almost independent of λ, but there is a slight variation in the normalised J2‐integral with respect to λ. This is provided that the normalising factor is the strain energy release rate of a homogeneous plate made from one of the materials with the same ratio of λ and subject to the same loading condition.Keywords
This publication has 44 references indexed in Scilit:
- Kinking of an interface crack in an orthotropic bimaterialFatigue & Fracture of Engineering Materials & Structures, 2013
- Simulation of crack propagation in anisotropic structures using the boundary element shape sensitivities and optimisation techniquesEngineering Analysis with Boundary Elements, 2011
- Effective spring stiffness for a planar periodic array of collinear cracks at an interface between two dissimilar isotropic materialsMechanics of Materials, 2011
- Shape optimization of two-dimensional anisotropic structures using the boundary element methodThe Journal of Strain Analysis for Engineering Design, 2003
- Shape design sensitivity analysis of 2D anisotropic structures using the boundary element methodEngineering Analysis with Boundary Elements, 2002
- Interfacial Fracture Mechanics for Anisotropic BimaterialsJournal of Applied Mechanics, 1993
- An array of no-slip tensile cracks at a bimaterial interfaceEngineering Fracture Mechanics, 1986
- Path independent integrals for computing stress intensity factors at sharp notches in elastic platesInternational Journal for Numerical Methods in Engineering, 1984
- Discussion: “Edge-Bonded Dissimilar Orthogonal Elastic Wedges Under Normal and Shear Loading” (Bogy, D. B., 1968, ASME J. Appl. Mech., 35, pp. 460–466)Journal of Applied Mechanics, 1969
- Plane Problems of Cracks in Dissimilar MediaJournal of Applied Mechanics, 1965