Assessment of Organic Carbon Removal by Particle Size Distribution Analysis
- 1 July 2009
- journal article
- research article
- Published by SAGE Publications in Environmental Engineering Science
- Vol. 26 (7) , 1239-1248
Abstract
Particle size distribution (PSD)-based fractionation, an alternative methodology in wastewater characterization, was employed to gather detailed information on the organic matter content of a raw olive mill wastewater (OMW) and to investigate the changes brought about in this characteristic after application of certain chemical treatment alternatives, namely, lime precipitation–coagulation, Fenton oxidation, and electrocoagulation. PSD-based analysis of the untreated OMW demonstrated that more than two-thirds of its organic carbon content, measured as chemical oxygen demand (COD) (69%), total organic carbon (TOC) (74%), as well as antioxidant activity (AOA) (74%) caused by the polyphenolic carbon fraction, was at the soluble range (<2 nm). Treatability experiments, with maximum overall removal efficiencies below 50% even under optimized conditions, indicated that none of the applied chemical pretreatment methods was sufficiently effective in removing the organics from the investigated OMW. Nonetheless, PSD-based fractionation of the pretreated samples provided an insight about the treatment alternatives and the size fractions where they performed better. Electrocoagulation was capable of removing particulate and colloidal matter and provided a relatively higher overall performance with 23, 20, and 34% decreases in COD, TOC, and polyphenol contents of the OMW, respectively. Fenton process, on the other hand, showed a lower overall performance in terms of COD and TOC removal (17 and 15%, respectively), yet it was significantly effective on the soluble fraction, and thus more successful in removing the polyphenols mostly originating from the soluble range, with an overall efficiency of 42%. Based on these observations, PSD analysis was suggested as a useful tool to perform detailed wastewater characterization, as well as to differentiate between specific impacts of different pretreatment processes and help choose between alternatives, especially when a particular pollutant is targeted.Keywords
This publication has 49 references indexed in Scilit:
- Advanced oxidation processes for the treatment of olive-oil mills wastewaterChemosphere, 2007
- Development of a liquid chromatography–electrospray ionization tandem mass spectrometry (LC–ESI MS/MS) method for the quantification of bioactive substances present in olive oil mill wastewatersAnalytica Chimica Acta, 2006
- Application of the central composite design and response surface methodology to the advanced treatment of olive oil processing wastewater using Fenton's peroxidationJournal of Hazardous Materials, 2005
- Decolourization and removal of phenolic compounds from olive mill wastewater by electrocoagulationChemical Engineering and Processing - Process Intensification, 2004
- Removal of molecular weight fractions of COD and phenolic compounds in an integrated treatment of olive oil mill effluentsBiodegradation, 2002
- Characterization and lime treatment of olive mill wastewaterWater Research, 2001
- Use of fenton reagent to improve organic chemical biodegradabilityWater Research, 2001
- The treatment and reuse of wastewater in the textile industry by means of ozonation and electroflocculationWater Research, 2001
- On the In-vitro Antimicrobial Activity of Oleuropein and HydroxytyrosolJournal of Pharmacy and Pharmacology, 1999
- Impact of the main phenolic compounds of olive mill wastewater (OMW) on the kinetics of acetoclastic methanogenesisProcess Biochemistry, 1997