Experimental Investigation on the Destruction Features and Acoustic Characteristics of a Brittle Rock Sample Containing Both 2D and 3D Preset Flaws
Open Access
- 27 November 2023
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 13 (23) , 12705
Abstract
Original fracture structures always present discontinuity in the real rock mass, and many invisible fractures hide inside the rock mass, which may cause serious engineering safety issues. To mimic the true 3D fracture structures through the experimental method, the gypsum rock-like samples containing both 2D through-type and 3D internal-type preset flaws are prepared, and multiple sets of inclination angles of the twin parallel flaws are set in the test. By applying the AE and DIC monitoring technologies during the uniaxial compression tests, the main results are as follows: (1) The flaw inclination angle presents a direct influence on the surface cracks distribution, maximum principal strain field, and the density of secondary failure in the middle rock; (2) AE events initially distribute around the internal 3D preset flaw, while the gradient inclination angle shows a slight impact on the events’ location before reaching the UCS status of samples; (3) mutations in b-values and S values can serve as evidence for predicting local damage, and the final failures quickly form at various scales and energy levels; (4) when the statistical analysis grid is divided sufficiently, the data window width and moving step length have little impact on the evaluation results, while the recommended bin width of event magnitude is 0.5 or 1.0.Keywords
Funding Information
- Natural Science Foundation of Fujian (2022J01567)
This publication has 45 references indexed in Scilit:
- Demonstration of spatial anisotropic deformation properties for jointed rock mass by an analytical deformation tensorComputers and Geotechnics, 2017
- Acoustic emission characteristics of the rock-like material containing a single flaw under different compressive loading ratesComputers and Geotechnics, 2017
- Effect of parallel joint interaction on mechanical behavior of jointed rock mass modelsInternational Journal of Rock Mechanics and Mining Sciences, 2017
- Dynamic Strength and Fracturing Behavior of Single-Flawed Prismatic Marble Specimens Under Impact Loading with a Split-Hopkinson Pressure BarRock Mechanics and Rock Engineering, 2016
- An Experimental and Numerical Study on Mechanical Behavior of Ubiquitous-Joint Brittle Rock-Like Specimens Under Uniaxial CompressionRock Mechanics and Rock Engineering, 2016
- Shearing of Materials with Intermittent JointsRock Mechanics and Rock Engineering, 2016
- On the stress dependence of the earthquake b valueGeophysical Research Letters, 2015
- Strength failure and crack coalescence behavior of brittle sandstone samples containing a single fissure under uniaxial compressionInternational Journal of Fracture, 2010
- Variations in earthquake-size distribution across different stress regimesNature, 2005
- The initiation of secondary cracks in compressionEngineering Fracture Mechanics, 2000