Improved Electrochemical Performance of RbxLi1.27-xCr0.2Mn0.53O2Cathode Materials via Incorporation of Rubidium Cations into the Original Li Sites
Authors:
- 7 October 2017
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 164 (13) , A3310-A3318
Abstract
Rubidium doped cathode materials RbxLi1.27-xCr0.2Mn0.53O2 (x = 0, 0.01, 0.03 and 0.05) were prepared via a solid state reaction method. The influences of the amount of Rb+ incorporated in the cathodes on the electrochemical performance were investigated in detail. It was found that the initial specific capacity, coulombic efficiency and rate performance were improved by Rb doping. Among the prepared cathode samples, the Rb0.03Li1.24Cr0.2Mn0.53O2 material presented the best results. The material showed an initial discharging capacity of 224.9 mAh·g−1, a capacity retention of 98.8% after 50 cycles and excellent high-rate performance of 92.0 mAh·g−1 at 5C rate. The improved diffusion coefficient of Li ions in the Rb+ incorporated cathodes was confirmed by electrochemical impedance measurement. The changes in diffusion coefficient are in good accordance with the changes in lattice parameter of c axis obtained from XRD Rietveld refinement. With the increase in Rb concentration, the interlayer spacing increases, then the diffusion of Li ions is enhanced and finally the electrochemical properties is improved. However, when x reaches 0.05, the lattice distorsion happened, c axis begins to shrink, the Li ion diffusion is restricted, and therefore the electrochemical performance is reduced with further increase in Rb concentration.Keywords
Funding Information
- Science and Technology Commission of Shanghai Municipality (Shanghai Municipal Science and Technology Commission) (14520503100)
- Shanghai Municipal Education Commission (15ZZ095)
- Science and Technology Commission of Shanghai Municipality (Shanghai Municipal Science and Technology Commission) (13PJ1407400, 201310-JD-B2-009)
- National Natural Science Foundation of China (NSFC) (21306113)
This publication has 36 references indexed in Scilit:
- High energy density of primary lithium batteries working with sub-fluorinated few walled carbon nanotubes cathodeJournal of Alloys and Compounds, 2017
- The future of automotive lithium-ion battery recycling: Charting a sustainable courseSustainable Materials and Technologies, 2014
- Spinel LiNi0.5Mn1.5O4 as superior electrode materials for lithium-ion batteries: Ionic liquid assisted synthesis and the effect of CuO coatingElectrochimica Acta, 2014
- Preparation and characterization of Cr-doped LiMnO2 cathode materials by Pechini's method for lithium ion batteriesMaterials Chemistry and Physics, 2013
- Effects of transition metal doping and surface treatment to improve the electrochemical performance of Li2MnO3Journal of Electroceramics, 2013
- The effect of particle surface facets on the kinetic properties of LiMn 1.5 Ni 0.5 O 4 cathode materialsJournal of Materials Chemistry A, 2012
- Effect of nano LiFePO4 coating on LiMn1.5Ni0.5O4 5V cathode for lithium ion batteriesJournal of Power Sources, 2012
- Layered lithium transition metal oxide cathodes towards high energy lithium-ion batteriesJournal of Materials Chemistry, 2012
- Properties of Li[CrxLi(1−x)/3Mn2(1−x)/3]O2 (0.1≤x≤0.2) material prepared by quenchingJournal of Power Sources, 2004
- Synthesis and electrochemical properties of layer-structured 0.5Li(Ni0.5Mn0.5)O2–0.5Li(Li1/3Mn2/3)O2 solid mixtureJournal of Power Sources, 2003