Fluidization of nanoagglomerates in a rotating fluidized bed
Authors:
- 13 April 2006
- journal article
- research article
- Published by Wiley in AIChE Journal
- Vol. 52 (7) , 2401-2412
Abstract
Agglomerates of nanoparticles were fluidized in a rotating fluidized bed (RFB) system at different rotating speeds corresponding to 10, 20, 30 and 40 times the gravity force (9.8 m/s2). The powders, fumed silica Aerosil® R974, Aerosil® R972 and Aeroxide® TiO2 P25, with a primary particle size of 12, 16 and 21 nm, respectively, form micron sized nanoagglomerates having a very low bulk density of around 30 kg/m3 for the fumed silicas, and a somewhat higher bulk density of about 90 kg/m3 for Aeroxide® TiO2 P25. Their fluidization behaviors are described by the fluidized bed expansion, pressure drop and minimum fluidization velocity (Umf). It was found that the fumed silica agglomerates expanded considerably while the TiO2 agglomerates showed very little bed expansion. The minimum fluidization velocities for Aerosil® R974 and R972 ranged from 0.02 to 0.07 m/s and from 0.13 to 0.20 m/s for Aeroxide® TiO2 P25; Umf increased at higher rotating speeds for all powders. At gas velocities above Umf, the fluidized bed pressure drop of fumed silica agglomerates was higher than theoretically estimated by mathematical models found in the literature. Thus, it is believed that for these light particles additional tangential momentum effects may increase the bed pressure drop and a revised model is proposed. In addition, the agglomerate size and external void fraction of the bed are predicted by using a fractal analysis coupled with a modified Richardson‐Zaki equation for data obtained with Aerosil® R972. © 2006 American Institute of Chemical Engineers AIChE J, 2006Keywords
This publication has 20 references indexed in Scilit:
- Gas fluidization characteristics of nanoparticle agglomeratesAIChE Journal, 2005
- Modeling for size reduction of agglomerates in nanoparticle fluidizationAIChE Journal, 2004
- Fine particle coating by a novel rotating fluidized bed coaterPowder Technology, 2004
- Review and future directions in the modelling and control of continuous drum granulationPowder Technology, 2002
- Gas–solid fluidization in a centrifugal fieldAIChE Journal, 2001
- Fundamentals of a centrifugal fluidized bedAIChE Journal, 1987
- On partial fluidization in rotating fluidized bedsAIChE Journal, 1987
- Particle entrainment from rotating fluidized bedsPowder Technology, 1986
- Flow characteristics in packed and fluidized rotating bedsPowder Technology, 1979
- Source–sink flows in a rotating annulus: a combined laboratory and numerical studyJournal of Fluid Mechanics, 1974