Improving Composite Tensile Properties during Resin Infusion Based on a Computer Vision Flow-Control Approach
Open Access
Abstract
Liquid composite manufacturing techniques, mainly applied in the transport industry, have been studied and optimized for decades while defect analysis and its minimization have been a goal to increase reliability and mechanical performance. Researchers have found that many process parameters have a strong influence on the mechanical behavior of composite structures where the flow front velocity, closely related to voids, plays a considerable role. In this work, the optimal flow front velocity was evaluated and controlled using a computer vision system for different laminates improving the mechanical tensile properties and void content. Enhanced mechanical tensile properties were found using a feedback flow-controller vision system which was able to keep the optimal flow front velocity constant to reduce the air traps among tows and fibers. Tensile strength was enhanced up to 18% for fiber orientation at 0° and 3.3% at 90°, whereas tensile modulus was increased up to 18.4% for fibers at 0° and 8.7% at 90°. A novel methodology is presented through this work, aiming to improve the robustness of resin film infusion (RFI) processes while ensuring the quality of the composite material.Keywords
This publication has 36 references indexed in Scilit:
- Characterisation of voids in fibre reinforced composite materialsNDT & E International, 2012
- Effects of vacuum pressure, inlet pressure, and mold temperature on the void content, volume fraction of polyester/e-glass fiber composites manufactured with VARTM processJournal of Composite Materials, 2011
- Modeling void formation and unsaturated flow in liquid composite molding processes: a survey and reviewJournal of Reinforced Plastics and Composites, 2011
- Void formation model and measuring method of void formation condition during hot pressing processPolymer Composites, 2010
- Variation of part thickness and compaction pressure in vacuum infusion processComposites Science and Technology, 2009
- Measurement of Void Content and Distribution in Composite Materials through Digital MicroscopyJournal of Composite Materials, 2008
- The effect of voids on the flexural fatigue performance of unidirectional carbon fibre composites developed for wind turbine applicationsInternational Journal of Fatigue, 2006
- Optimization of injection flow rate to minimize micro/macro-voids formation in resin transfer molded compositesComposites Science and Technology, 2006
- Modeling of void formation and removal in liquid composite molding. Part I: Wettability analysisPolymer Composites, 1996
- Effects of fiber mat architecture on void formation and removal in liquid composite moldingPolymer Composites, 1995