Torque-Vectoring Control for an Autonomous and Driverless Electric Racing Vehicle with Multiple Motors
Authors:
- 28 March 2017
- journal article
- Published by SAE International in SAE International Journal of Vehicle Dynamics, Stability, and NVH
- Vol. 01 (2) , 338-351
Abstract
Electric vehicles with multiple motors permit continuous direct yaw moment control, also called torque-vectoring. This allows to significantly enhance the cornering response, e.g., by extending the linear region of the vehicle understeer characteristic, and by increasing the maximum achievable lateral acceleration. These benefits are well documented for human-driven cars, yet limited information is available for autonomous/driverless vehicles. In particular, over the last few years, steering controllers for automated driving at the cornering limit have considerably advanced, but it is unclear how these controllers should be integrated alongside a torque-vectoring system. This contribution discusses the integration of torque-vectoring control and automated driving, including the design and implementation of the torque-vectoring controller of an autonomous electric vehicle for a novel racing competition. The paper presents the main vehicle characteristics and control architecture. A quasi-static model is introduced to predict the understeer characteristics at different longitudinal accelerations. The model is coupled with an off-line optimization for the a-priori investigation of the potential benefits of torque-vectoring. The systematic computation of the achievable cornering limits is used to specify and design realistic maps of the reference yaw rate, and a non-linear feedforward yaw moment contribution providing the reference cornering response in quasi-static conditions. A gain scheduled proportional integral controller increases yaw damping, thus enhancing the transient response. Simulation results demonstrate the effectiveness of the proposed approach.Keywords
This publication has 21 references indexed in Scilit:
- Integrated torque vectoring and power management framework for electric vehiclesControl Engineering Practice, 2016
- Driving modes for designing the cornering response of fully electric vehicles with multiple motorsMechanical Systems and Signal Processing, 2015
- An optimal torque distribution control strategy for four-independent wheel drive electric vehiclesVehicle System Dynamics, 2015
- Direct yaw moment control actuated through electric drivetrains and friction brakes: Theoretical design and experimental assessmentMechatronics, 2015
- Torque Vectoring of a Formula SAE through Semi Active Differential ControlSAE International Journal of Advances and Current Practices in Mobility, 2014
- Integral Sliding Mode for the Torque-Vectoring Control of Fully Electric Vehicles: Theoretical Design and Experimental AssessmentIEEE Transactions on Vehicular Technology, 2014
- Wheel Torque Distribution Criteria for Electric Vehicles With Torque-Vectoring DifferentialsIEEE Transactions on Vehicular Technology, 2013
- Control Allocation based Optimal Torque Vectoring for 4WD Electric VehicleSAE International Journal of Advances and Current Practices in Mobility, 2012
- An Application of Traction Vectoring to a Formula SAE CarSAE International Journal of Advances and Current Practices in Mobility, 2008
- Independent control of all-wheel-drive torque distributionVehicle System Dynamics, 2006