Silicon nanowire fabrication
Authors:
- Tijjani AdamTATijjani Adam
- U. HashimUHU. Hashim
- 29 April 2014
- journal article
- Published by Emerald Publishing in Microelectronics International
- Vol. 31 (2) , 78-85
Abstract
Purpose: – The purpose of this study is to present reports on fabrication of silicon (Si) nanowires (NWs). The study consists of microwire formation on silicon-on-insulator (SOI) that was fabricated using a top-down approach which involved conventional photolithography coupled with shallow anisotropic etching.Design/methodology/approach: – A 5-inch p-type silicon-on-insulator (SOI) coated with 250nm layer and Photoresist (PR) with thickness of 400nm is coated in order to make pattern transfer via binary mask, after the exposure and development, a resist pattern between 3 μm-5 μm were obtained, Oxygen plasma spreen was used to reduce the size of the PR to 800 μm, after this, the wafer with 800 μm was loaded into SAMCO inductively coupled plasma (ICP)-RIE and got silicoon microwire was obtained. Next, the sample was put into an oxidation furnace for 15, 30, 45 and 60 minutes and the sample was removed and dipped into a buffered oxide etch solution for five minutes to remove all the SiO2ashes.Findings: – The morphological characterization was conducted using scanning electron microscopy and atomic force microscopy. At terminal two, gold electrodes which were designated as source and drain were fabricated on top of individual NWs using conventional lithography electrical and chemical response. Once the trimming process has been completed, the device's current–voltage (I-V) characteristic was measured by using a Keithley 4200 semiconductor parameter analyser. Devices with different width of wires approximately 20, 40, 60 and 80 nm were characterized. The wire current variation as a function of the pH variation in voltage was investigated: pH monitoring for variations of pH values between 5 and 9.Originality/value: – This paper provides useful information on novel and yet simple cost-effective fabrication of SiNW; as such, it should be of interest to a broad readership, especially those interested in micro/nanofabrication.Keywords
This publication has 14 references indexed in Scilit:
- High Throughput Ultralong (20 cm) Nanowire Fabrication Using a Wafer-Scale Nanograting TemplateNano Letters, 2013
- ELECTROSTATICS OF A NANOWIRE INCLUDING NONLOCAL EFFECTSProgress In Electromagnetics Research Letters, 2013
- SILICON BASED VERTICAL MICRO-COAXIAL TRANSITION FOR HIGH FREQUENCY PACKAGING TECHNOLOGIESProgress In Electromagnetics Research B, 2013
- ON THE SIMPLIFICATION OF THE MODELING OF ELECTRON-CYCLOTRON WAVE PROPAGATION IN THERMONUCLEAR FUSION PLASMASProgress In Electromagnetics Research B, 2013
- VERTICAL ELECTRIC FIELDS AND FIELD CHANGE PARAMETERS DUE TO PARTLY INCLINED LIGHTNING LEADER CHANNELSProgress In Electromagnetics Research, 2013
- Polysilicon nanogap fabrication using a thermal oxidation processMicroelectronics International, 2012
- Volume Removed - Publisher's DisclaimerProcedia Engineering, 2012
- Effect of Manganese Content on the Fabrication of Porous Anodic AluminaJournal of Nanomaterials, 2012
- Sub-20 nm Si/Ge Superlattice Nanowires by Metal-Assisted EtchingNano Letters, 2009
- The Poisson–Boltzmann equation for biomolecular electrostatics: a tool for structural biologyJournal of Molecular Recognition, 2002