Critical Characteristic Dimension or Geometry for Determining the Susceptibility of a Crevice to Crevice Corrosion
Author:
- 1 August 2004
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 60 (8) , 707-717
Abstract
Crevices are invariably present in engineering structures. Hence, it is of interest to develop the ability to predict which geometries will, or will not, lead to crevice corrosion. Since many crevice corrosion theories have been proposed that depend on the material-environment combination, two systems have been selected for study: mild steel (MS) under anodic polarization in a sodium acetate–acetic acid buffer solution (NaAc-AcH) and Al in a sodium chloride (NaCl) solution. The onset of crevice corrosion is respectively believed to be determined by a critical potential drop (IR drop theory for MS in NaAc-AcH) and a critical species’ concentration (critical crevice composition theory for Al in NaCl). In both cases, these critical values can be translated, by computation, into a critical characteristic crevice dimension determining the onset of crevice corrosion in one-dimensional crevices. The critical characteristic dimension marks the limit between crevices that show or do not show crevice corrosion. The calculations for the system where the critical crevice composition theory is operative have been performed with a finite element code to describe the mass transport of the various species involved. This approach allows the criterion (critical potential drop or critical crevice composition) to be evaluated for crevices of any geometry in real components.Keywords
This publication has 17 references indexed in Scilit:
- Determining the Critical Crevice Depth for Iron in a Sodium Acetate-Acetic Acid Buffer SolutionJournal of the Electrochemical Society, 2003
- IR Mechanism of Crevice Corrosion for Alloy T-2205 Duplex Stainless Steel in Acidic-Chloride MediaJournal of the Electrochemical Society, 2001
- An Iteration Method for the Computation of Potential and Current Distributions at a Partially Passivated ElectrodeJournal of the Electrochemical Society, 1999
- The Effect of Crevice‐Opening Dimension on the Stability of Crevice Corrosion for Nickel in Sulfuric AcidJournal of the Electrochemical Society, 1998
- The Effect of Electrolyte Properties on the Mechanism of Crevice Corrosion in Pure IronJournal of the Electrochemical Society, 1998
- Effect of the applied potential on the potential and current distributions within crevices in pure nickelCorrosion Science, 1998
- The initiation of crevice corrosion in stainless steelsCorrosion Science, 1997
- Mathematical modeling of mass transport and chemical reaction in crevice and pitting corrosionCorrosion Science, 1990
- Crevice Corrosion of Titanium and AISI 304 in Acid Solutions. Comparison of experimental and calculated resultsMaterials and Corrosion, 1974
- Crevice corrosion: calculation of the voltage and current distribution along the creviceMaterials and Corrosion, 1971