Modeling Transient Rolling Resistance of Tires3
Authors:
- 1 June 2007
- journal article
- Published by The Tire Society in Tire Science and Technology
- Vol. 35 (2) , 118-140
Abstract
The transient rolling resistance of several tires is predicted from the behavior of each tire on an equilibrium test. The objective of the study was to determine if model predictions would fall within the lab-to-lab experimental error described in the J-2452 test standard. The model used for this study, to predict the results of J-2452 from J-1269 data, was presented in Ref. [1]. The study used data from one tire to establish the model parameters. Then those parameters were used with tire and rolling resistance measurements from 12 other tires of another size. These tires were from four samples of each of three different tire constructions (tread patterns) and manufacturer. The reasons for the differences between the predictions and the test results were investigated and two significant sources of error were identified. First, the simplistic assumption that one set of heat-transfer parameters would apply to all tires was found to be inadequate. Second, the matrix of test conditions and regression model in J-1269, which must be used to extrapolate to the test conditions of J-2452, is inadequate. The modeling work in this article also found some of the details of the test protocols that may have significant effects on reported rolling resistance.Keywords
This publication has 10 references indexed in Scilit:
- An Analytical Model for the Transient Rolling Resistance Behavior of TiresTire Science and Technology, 1999
- A Material Model for Simulating the Hysteretic Behavior of Filled Rubber for Rolling TiresTire Science and Technology, 1998
- Rolling Loss of Pneumatic Highway Tires in the EightiesRubber Chemistry and Technology, 1990
- Load, Speed and Inflation Pressure Effects on Rolling Loss Distribution in Automobile TiresTire Science and Technology, 1988
- Transient Speed and Temperature Effects on Rolling Loss of Passenger Car TiresSAE International Journal of Advances and Current Practices in Mobility, 1985
- Prediction of Contained Air Temperature from SAE Standard Rolling Resistance Test DataSAE International Journal of Advances and Current Practices in Mobility, 1983
- Tire Rolling Loss and Pressure IncreaseSAE International Journal of Advances and Current Practices in Mobility, 1983
- The Structure and Use of the GMR Combined Thermo-Mechanical Tire Power Loss ModelSAE International Journal of Advances and Current Practices in Mobility, 1981
- The Rolling Loss of Pneumatic TiresRubber Chemistry and Technology, 1980
- Transient Versus Steady-State Tire Rolling Loss TestingSAE International Journal of Advances and Current Practices in Mobility, 1979