A simple method, which is based on Lambert W function and two assumptions (namely, solar cell photocurrent is much larger than the reverse saturation current, and the shunt resistance is much larger than the series resistance), is proposed to extract five parameters of the cell (photocurrent Iph, ideality factor n, reverse saturation current I0, series Rs and shunt Rsh resistance) from a single current–voltage curve. When this method is used to analyze existing literature data, the results show that it not only extracts all parameters accurately but also fits for different kinds of solar cells. The well fittings between the measured and calculated data prove the above findings. Then, the effects of radiation intensity Pin and angle of the incident light on five parameters have been investigated in detail. From the extracted results, it can be seen that Iph and Rs increase with Pin, while n, I0 and Rsh decrease continuously with Pin for a radiation intensity range 0.3≤Pin≤1.31 W/m2. And, it is observed that Iph and Rs monotonically decrease with , but n, I0 and Rsh increase with for a light incident angle range 0≤≤40°. After a theoretical discussion, the conclusion can be drawn that the effective light intensities received by a cell play a critical role in modeling behaviors of five parameters. In addition, it is found that n is least sensitive to the radiation intensity and light incident angle.