Influence of Al3Ni crystallisation origin particles on hot deformation behaviour of aluminium based alloys
- 27 December 2016
- journal article
- research article
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 97 (8) , 572-590
Abstract
Binary Al–Ni, Al–Mg and ternary Al–Mg–Ni alloys containing various dispersions and volume fraction of second-phase particles of crystallisation origin were compressed in a temperature range of 200–500 °C and at strain rates of 0.1, 1, 10, 30 s−1 using the Gleeble 3800 thermomechanical simulator. Verification of axisymmetric compression tests was made by finite-element modelling. Constitutive models of hot deformation were constructed and effective activation energy of hot deformation was determined. It was found that the flow stress is lowered by decreasing the Al3Ni particle size in case of a low 0.03 volume fraction of particles in binary Al–Ni alloys. Intensive softening at large strains was achieved in the alloy with a 0.1 volume fraction of fine Al3Ni particles. Microstructure investigations confirmed that softening is a result of the dynamic restoration processes which were accelerated by fine particles. In contrast, the size of the particles had no influence on the flow stress of ternary Al–Mg–Ni alloy due to significant work hardening of the aluminium solid solution. Atoms of Mg in the aluminium solid solution significantly affect the deformation process and lead to the growth of the effective activation energy from 130–150 kJ/mol in the binary Al–Ni alloys to 170–190 kJ/mol in the ternary Al–Mg–Ni alloy.Keywords
Funding Information
- Ministry of Education and Science of the Russian Federation (МК-2301.2017.8)
- National Research University Higher School of Economics
This publication has 65 references indexed in Scilit:
- Hot deformation behavior of Al-Zn-Mg-Cu-Zr aluminum alloys during compression at elevated temperatureTransactions of Nonferrous Metals Society of China, 2011
- Quantitative phase analysis of the Al-Zn-Mg-Cu-Ni phase diagram in the region of compositions of high-strength nickalinesRussian Journal of Non-Ferrous Metals, 2010
- Flow stress prediction at hot working conditionsMaterials Science and Engineering: A, 2010
- Flow behavior and microstructural evolution of Al–Cu–Mg–Ag alloy during hot compression deformationMaterials Science and Engineering: A, 2009
- Through-process simulation of texture and properties during the thermomechanical processing of aluminium sheetsActa Materialia, 2007
- A mathematical model for evolution of flow stress during hot deformationMaterials Letters, 2005
- Dynamic grain growth in Al–6Ni: Modelling and experimentsActa Materialia, 2005
- Recrystallization in hot vs cold deformed commercial aluminum: a microstructure path comparisonActa Materialia, 2003
- A study on the hot-deformation behavior and dynamic recrystallization of Al–5 wt.%Mg alloyJournal of Materials Processing Technology, 2001
- Grain size and temperature dependence of superplastic deformation in an Al–Mg alloy under isostructural conditionActa Materialia, 2000