Biomechanical aspects of incisor action of beavers ( Castor fiber L.)
Authors:
- Clara StefenCSClara Stefen
- Jörg HabersetzerJHJörg Habersetzer
- Ulrich WitzelUWUlrich Witzel
- 21 January 2016
- journal article
- research article
- Published by Oxford University Press (OUP) in Journal of Mammalogy
- Vol. 97 (2) , 619-630
Abstract
Beavers are known for their gnawing performance, e.g., felling trees. Even though this is well known, the biomechanics of it are not, and so this is the focus of this study. The lower incisors work as main cutting tools so that their technical parameters were studied. There are 3 angles (adding to 90°) of importance in cutting: (1) the wedge angle, the angle of the incisor tip; (2) the clearance angle between tooth and material (tree trunk); and (3) the chip angle between incisor tip and the perpendicular to the surface of the trunk. Cutting is usually oblique to the wood fibers. For technical wood cutting tools, an optimal wedge angle of 27° is known under certain conditions, and for the incisor of Castor fiber the wedge angle was determined using micro-Computed Tomography (µCT) scans to be 26.95°. Potential cutting forces of beavers were estimated for wood chips (2mm in thickness) of 3 sample tree species. For plum trees hardness forces ranged from 246 to 328N, and for maples from 190 to 254N. Finite element analyses were performed to determine stresses in the incisor under different loads on the incisor tip. Three hypotheses concerning gnawing were posed and are supported by the data: (1) The shape of the cutting blade of the incisor determines the geometry of wood chips and ultimately the maximum wood hardness that can be cut. (2) Clearance angle and maximum gape determine the maximum diameter of a tree that can be cut (if rough bark is neglected). (3) Functionally most importantly the lower incisors are optimized in shape and supporting tissue for compression stress with all forces being transmitted along the locations of the center of gravity in theoretical cross sections within the tooth, so that only compression occurs under load.Keywords
This publication has 26 references indexed in Scilit:
- Woodcutting behavior in beavers (Castoridae, Rodentia): estimating ecological performance in a modern and a fossil taxonPaleobiology, 2008
- Ecological impact of beaversCastor fiberandCastor canadensisand their ability to modify ecosystemsMammal Review, 2005
- Environmental seasonality and incremental growth rates of beaver (Castor canadensis) incisors: implications for palaeobiologyPalaeogeography, Palaeoclimatology, Palaeoecology, 2004
- Winter food caches of beaversCastor fiber in NE PolandMammal Research, 2002
- A Unique Localization of Mechanoreceptors in the Periodontal Tissue of Guinea Pig Teeth.Archives of Histology and Cytology, 2002
- A Reassessment of Morphological Specializations for Digging in Pocket GophersJournal of Mammalogy, 1989
- Dentine hardness and incisor wear in the beaver (Castor fiber)Cells Tissues Organs, 1969
- Sizes of Beaver Chips Cut from AspenJournal of Mammalogy, 1957
- Comparison of Tree Cuttings of Six Beaver Colonies in Allegany State Park, New YorkJournal of Mammalogy, 1943
- Fifteen Months of Beaver Work at Allegany State Park, N. Y.Journal of Mammalogy, 1939