Effect of off‐axis concentrated loading on failure of curved brittle layer structures
Authors:
- 29 August 2005
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Vol. 76B (2) , 334-339
Abstract
A study is made of the effects of superposed tangential force by off‐axis indentation loading on curved bilayers consisting of brittle shells filled with polymer support material. Such loadings are pertinent to all‐ceramic crown structures on tooth dentin in occlusal function. Layer flexure places the ceramic undersurfaces in tension, leading to fracture by initiation and propagation of radial cracks. Following an earlier study, model specimens with curved surfaces are prepared by pressing glass plates 1 mm thick onto steel spherical dies with radius of curvature 20 mm to 8 mm at elevated temperatures, and bonding the resultant hemispherical shells onto an epoxy support base. The specimens are tested by indentation with spheres loaded vertically but off‐center, with the contact center located at 30° to the hemisphere axis. The applied loads to initiate radial cracks are little affected by the resultant tangential component, but the loads to propagate the same cracks to the specimen edges are substantially reduced. Finite element calculations are used to evaluate stress states in the specimens for correlation with the experimental data. © 2005 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2006Keywords
This publication has 25 references indexed in Scilit:
- Contact damage in brittle coating layers: Influence of surface curvatureJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2004
- Numerical interpretation of cone crack initiation trends in a brittle coating on a compliant substrateMaterials Science and Engineering: A, 2004
- A numerical study of fracture modes in contact damage in porcelain/Pd-alloy bilayersMaterials Science and Engineering: A, 2004
- Overview: Damage in brittle layer structures from concentrated loadsJournal of Materials Research, 2002
- Rate Effects in Critical Loads for Radial Cracking in Ceramic CoatingsJournal of the American Ceramic Society, 2002
- Ceramic-based layer structures for biomechanical applicationsCurrent Opinion in Solid State and Materials Science, 2002
- Cracking in Ceramic/metal/polymer Trilayer SystemsJournal of Materials Research, 2002
- Effect of Tangential Loading on Critical Conditions for Radial Cracking in Brittle CoatingsJournal of the American Ceramic Society, 2001
- Damage-Resistant Brittle CoatingsAdvanced Engineering Materials, 2000
- Development of an Artificial Oral Environment for the Testing of Dental Restoratives: Bi-axial Force and Movement ControlJournal of Dental Research, 1983