Analysis of Factors Influencing Vibration Suppression of Spray Boom-Air Suspension for Medium and Small-Scale High-Clearance Sprayers
Open Access
Abstract
Medium and small-scale high-clearance sprayers are widely applied in medium and small-scale farms. Owing to power and load limitations, it is difficult to manage the complex system for suppressing spray boom vibration. This study was conducted to design a spray boom-air suspension system suitable for medium and small-size high-clearance sprayers by combining spray boom vibration suppression and the characteristics of air spring charging/discharging. Thus, this study aims to address the non-homogeneous distribution of spray triggered by the spray boom vibrations in medium and small high-clearance sprayers. The effects of different elastic elements on the vibration suppression effect of the spray boom were compared. According to the bench test, the dynamic response results of the spray boom under transient and sinusoidal excitations indicate that air spring is more conducive to vibration suppression than coil spring. The results obtained from the field experiments indicate that under the low solid soil condition, the spray boom air suspension should match a small additional air chamber with a volume of approximately 0.6 L, and the damping coefficient of the damper should be approximately 1792 N·s/m. In the case of the high firm soil, the spray boom air suspension should match a large additional air chamber with a volume of approximately 3.6 L, while the damping coefficient of the damper should be set to approximately 1316 N·s/m. The soil with low moisture content and high firmness are unfavorable to the vibration suppression of the spray boom. This study provides a reference for enhancing the vibration suppression of the spray boom-air suspension and improving the spray uniformity of the sprayer.Keywords
Funding Information
- Su Zhou Science and Technology Plan Agricultural Science and Technology Innovation Project (SNG201901 SNG2020042)
- Jiangsu Agricultural Science and Technology Innovation Fund (CX(17)1002-04)
This publication has 14 references indexed in Scilit:
- Design Optimisation for the Vertical Suspension of a Crop Sprayer BoomBiosystems Engineering, 2005
- Design of an active suspension to suppress the horizontal vibrations of a spray boomJournal of Sound and Vibration, 2003
- Design and evaluation of a low-power mobile shaker for vibration tests on heavy wheeled vehiclesJournal of Terramechanics, 2000
- Sprayer Boom Motion, Part 2: Validation of the Model and Effect of Boom Vibration on Spray Liquid DepositionJournal of Agricultural Engineering Research, 2000
- Sprayer Boom Motion, Part 1: Derivation of the Mathematical Model using Experimental System Identification TheoryJournal of Agricultural Engineering Research, 2000
- Modelling the Effect of Passive Vertical Suspensions on the Dynamic Behaviour of Sprayer BoomsJournal of Agricultural Engineering Research, 1999
- STRUCTURAL MODIFICATION EFFECTS ON THE DYNAMIC BEHAVIOR OF AN AGRICULTURAL TRACTORTransactions of the ASAE, 1998
- Spray Boom Motions and Spray Distribution: Part 1, Derivation of a Mathematical RelationJournal of Agricultural Engineering Research, 1997
- The design and performance of a gimbal-type mounting for sprayer booms 1. Development procedureJournal of Agricultural Engineering Research, 1987
- The design and performance of a gimbal-type mounting for sprayer booms 2. Optimization model and validationJournal of Agricultural Engineering Research, 1987