Replaceable links with direct brace attachments for eccentrically braced frames
- 29 March 2017
- journal article
- research article
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 46 (13) , 2121-2139
Abstract
Summary: This paper reports findings of an experimental study conducted on replaceable links for steel eccentrically braced frames (EBFs). A replaceable link detail which is based on splicing the directly connected braces and the beam outside the link is proposed. This detail eliminates the need to use hydraulic jacks and flame cutting operations for replacement purposes. Performance of this proposed replaceable link was studied by conducting eight nearly full‐scale EBF tests under quasi‐static cyclic loading. The link length ratio, stiffening of the link, loading protocol, connection type, bolt pretension, gap size of splice connections, and demand‐to‐capacity ratios of members were considered as the prime variables. The specimens primarily showed two types of failure modes: link web fracture and fracture of the flange at the link‐to‐brace connection. No failures were observed at the splice connections indicating that the proposed replaceable link detail provides an excellent response. The inelastic rotation capacity provided by the replaceable links satisfied the requirements of the AISC Seismic Provisions for Structural Steel Buildings (AISC341–10). The overstrength factor of the links exceeded 2.0, which is larger than the value assumed for EBF links by design provisions. The high level of overstrength resulted in brace buckling in one of the specimens demonstrating the importance of overstrength factor used for EBF links. Copyright © 2017 John Wiley & Sons, Ltd.Keywords
Funding Information
- The Scientific and Technological Council of Turkey (114M251)
This publication has 20 references indexed in Scilit:
- Experimental validation of re-centring capability of eccentrically braced frames with removable linksEngineering Structures, 2016
- Cyclic Behavior of Very Short Steel Shear LinksJournal of Structural Engineering, 2016
- Evaluation of Seismic Response Factors for Eccentrically Braced Frames Using FEMA P695 MethodologyEarthquake Spectra, 2016
- Experimental Validation of Replaceable Shear Links for Eccentrically Braced Steel FramesJournal of Structural Engineering, 2011
- Re‐centring capacity of dual‐steel framesSteel Construction, 2011
- Dual high‐strength steel eccentrically braced frames with removable linksEarthquake Engineering & Structural Dynamics, 2008
- Effects of the frame geometry on the weight and inelastic behaviour of eccentrically braced chevron steel framesJournal of Constructional Steel Research, 2008
- Influence of the link overstrength factor on the seismic behaviour of eccentrically braced framesJournal of Constructional Steel Research, 2007
- Testing Protocol for Short Links in Eccentrically Braced FramesJournal of Structural Engineering, 2006
- Experimental Study of Local Buckling, Overstrength, and Fracture of Links in Eccentrically Braced FramesJournal of Structural Engineering, 2005