First experience with He conditioning of a superconducting rf photoinjector
Authors:
- I. PetrushinaIPI. Petrushina
- J. MaJMJ. Ma
- I. PinayevIPI. Pinayev
- G. WangGWG. Wang
- D. KayranDKD. Kayran
- F. SeverinoFSF. Severino
Open Access
- 6 September 2022
- journal article
- research article
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 25 (9) , 092001
Abstract
The recent achievements in the performance of superconducting rf (SRF) photoinjectors have opened a new era in the development of reliable high-brightness cw electron sources. While the SRF guns become one of the most promising technologies, the compatibility of the SRF environment with the complex photocathodes remains at the forefront of the modern accelerator science. The SRF cavities operate at cryogenic temperatures providing the ultrahigh vacuum environment highly beneficial for the photocathode performance. However, the necessity to keep the photocathodes at room temperature while being surrounded by the cavity walls that are kept at cryogenic temperatures creates an additional complexity for the SRF gun design and operation. The complex and volatile chemical compounds used for photocathodes have a high chance of contaminating the surfaces of the SRF cavity. When deposited, such compounds could create centers for cold electron emission which degrade the performance of the SRF guns. Such a circumstance would require the development of the in-situ processing techniques for restoring the SRF cavity performance. This paper presents the results of the successful implementation and application of the He conditioning method for cavity restoration using the existing SRF photoinjector at Brookhaven National Laboratory (BNL). The method has proven to be extremely effective and resulted in a dramatic improvement in the BNL gun performance.Keywords
Funding Information
- Nuclear Physics (DE-SC0021426)
This publication has 10 references indexed in Scilit:
- Long lifetime of bialkali photocathodes operating in high gradient superconducting radio frequency gunScientific Reports, 2021
- Field emission mitigation studies in the SLAC Linac Coherent Light Source II superconducting rf cavities via in situ plasma processingPhysical Review Accelerators and Beams, 2021
- High-Brightness Continuous-Wave Electron Beams from Superconducting Radio-Frequency Photoemission GunPhysical Review Letters, 2020
- Mitigation of multipacting in 113 MHz superconducting rf photoinjectorPhysical Review Accelerators and Beams, 2018
- Ignition and monitoring technique for plasma processing of multicell superconducting radio-frequency cavitiesJournal of Applied Physics, 2016
- Report of the Basic Energy Sciences Workshop on the Future of Electron Sources, September 8-9, 20162016
- Design of a high-bunch-charge 112-MHz superconducting RF photoemission electron sourceReview of Scientific Instruments, 2016
- In-situ plasma processing to increase the accelerating gradients of superconducting radio-frequency cavitiesNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2016
- Coherent Electron CoolingPhysical Review Letters, 2009
- Influence of condensed gases on field emission and the performance of superconducting RF cavitiesIEEE Transactions on Magnetics, 1989