Structural load monitoring of floating mooring column and its application on optimal regulation for water conveyance system operation of sea shiplock
Authors:
- Junlin QiJQJunlin Qi
- Lexin LiLLLexin Li
- Tao JiangTJTao Jiang
- Zhouyu XiangZXZhouyu Xiang
- Jia YangJYJia Yang
- Linjian WuLinjian Wu
Open Access
- 27 July 2023
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Energy Research
- Vol. 11, 1218430
Abstract
Due to the sea water intrusion and the development trend of using large-scale ships, more stringent requirements are put forward for the safety of water delivery process and the mooring equipment operation for the sea shiplock. The maximum loads for the mooring equipment of sea shiplock, i.e., floating mooring column (FMC), are generally occurred at the end of water delivery. The superimposed effect of turbulent flow and marine corrosive environment can accelerate the failure of the floating mooring column structure for the sea shiplock, which leads to the safety incidents, including the structural damage of FMC and the breakage of mooring lines for the ship, etc. The safety of the FMC is mostly influenced by three factors, including the ship’s tonnage, the water flow environment of the locked room, and the lock operation technologies; among these, the water flow environment can be considered the most significant. In practice, because the mooring load of an FMC due to water delivery from the shiplock is very complicated, there is currently no mature approach to condition monitoring. This investigation aims to address a large sea shiplock, and the optimal regulation approach for water delivery of shiplock is established based on a load monitoring methodology for FMCs. The detection accuracy of the FMC mooring loads is controlled by simulation verification with errors less than 10%. During the optimized water delivery process, the exerted loads on the FMCs are noticeably reduced to be lower than the maximum design rating. The innovative approach is essentially based on an inversion calculation of the load response model for obtaining the mooring loads of FMCs, with the monitored load results used to regulate and optimize the water delivery process of the shiplocks. The research results can fill a part of the research gap of FMC mooring load condition monitoring method in shiplock water delivery, and provide technical support for the safety of shiplock water delivery process and mooring equipment operation.Keywords
This publication has 25 references indexed in Scilit:
- Mean flow and turbulence statistics through a sluice gate in a navigation lock system: A numerical studyEuropean Journal of Mechanics - B/Fluids, 2020
- On the fluid-structure response of elastic-plastic ship sides subjected to impact loadsMarine Structures, 2020
- Nonlinear numerical analysis and progressive damage assessment of a cable-stayed bridge pier subjected to ship collisionMarine Structures, 2020
- Research on Calculation Method of Wave Load and Mooring Force Based on Time Domain Potential Flow Theory2019
- Ship collision damage assessment and validation with experiments and numerical simulationsMarine Structures, 2019
- Physical modeling applied in evaluation of the safety and efficiency of vessel mooring plansRBRH, 2018
- Various Aspects of Bollard Pull Tests and Analysis of Test ResultsJournal of Ship Production and Design, 2018
- Numerical prediction of hydrodynamic forces on a moored ship due to a passing shipProceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 2018
- Preliminary Study on Characteristics of Motions of Side-by-side Moored Vessels during Waves in PortThe Journal of Japan Institute of Navigation, 2018
- Improved SPH simulation of spilled oil contained by flexible floating boom under wave–current coupling conditionJournal of Fluids and Structures, 2018