Optimal Design of a Novel 3-DOF Orientational Parallel Mechanism for Pelvic Assistance on a Wheelchair: An Approach Based on Kinematic Geometry and Screw Theory
- 21 February 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 5 (2) , 3315-3322
Abstract
Pelvis mobility is essential to the daily seated activities of wheelchair users, however it is not yet fully addressed in the field of active wearable devices. This letter presents a novel design and optimization methodology of an in-parallel actuated robotic brace for assisting the human pelvis during seated maneuvers on wheelchair. This design uses human data captured by cameras in conjunction with the knowledge of kinematic geometry and screw theory. The mechanism has full rotational three degrees-of-freedom (DOFs) and also accommodates coupled translation of the human pelvic segment. This type of motion was realized by employing three kinematic limbs that impose non-intersecting zero-pitch constraint wrenches on the platform. Our multi-objective optimization (MOO) routine consists of two stages: (I) platform constraint synthesis, where the geometric parameters of the limb constraints were determined to minimize the pelvis-platform errors of trajectories and instantaneous screw axes (ISAs); and (II) limb structural synthesis, where limb types and dimensions, workspace, transmission performances, singularities, and actuated joint displacements were considered. The optimized mechanism has an asymmetrical [ R RR]U-2[ R R]S architecture. This mechanism can also be integrated into our previously developed Wheelchair Robot for Active Postural Support (WRAPS).Keywords
Funding Information
- National Science Foundation (IIS-1527087)
- Ophaswongse is supported by the Anandamahidol Foundation Doctoral Scholarship
- Patronage of His Majesty King Bhumibol Adulyadej the Great of Thailand
This publication has 36 references indexed in Scilit:
- A New Approach for Singularity Analysis and Closeness Measurement to Singularities of Parallel ManipulatorsJournal of Mechanisms and Robotics, 2012
- Decoupled pelvis rotation in sitting: A passive motion technique that regulates buttock load associated with pressure ulcer developmentJournal of Biomechanics, 2009
- Kinematics of the trunk in sitting posture: An analysis based on the instantaneous axis of rotationErgonomics, 2009
- Design, Control and Performance ofRiceWrist:A Force Feedback Wrist Exoskeleton for Rehabilitation and TrainingThe International Journal of Robotics Research, 2008
- Generalized transmission index and transmission quality for spatial linkagesMechanism and Machine Theory, 2007
- Sitting with Adjustable Ischial and Back Supports: Biomechanical ChangesSpine, 2003
- A fast and elitist multiobjective genetic algorithm: NSGA-IIIEEE Transactions on Evolutionary Computation, 2002
- Identification of principal screws of 3-DOF parallel manipulators by quadric degenerationMechanism and Machine Theory, 2001
- Posture effect on seating interface biomechanics: Comparison between two seating cushionsArchives of Physical Medicine and Rehabilitation, 1996
- Seated Lumbar/Pelvic AlignmentSpine, 1992