Effects of ultrasonic vibration on the microstructure and mechanical properties of high alloying TiAl
Authors:
Open Access
- 24 January 2017
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 7 (1) , 41463
Abstract
To modify the microstructure and enhance performances, the ultrasonic vibration is applied in the mould casting of TiAl alloy. The effects and mechanism of ultrasonic vibration on the solidifying microstructure and mechanical properties are investigated and the model for predicting lamellar colony size is established. After ultrasonic vibration, the coarse microstructure is well modified and lamellar colony is refined from 534 μm to 56 μm. Most of precipitated phases are dissolved into the lamellar colony leading to a homogenous element distribution. The phase ratio of α2-Ti3Al and γ-TiAl is increased, and the chemical composition is promoted to more close to equilibrium level by weakening the influence of β-alloying elements. The microhardness and yield strength are gradually improved by 23.72% and 181.88% due to the fine grain strengthening, while the compressive strength is enhanced by 24.47% through solution strengthening. The critical ultrasonic intensity (Ib) for TiAl alloy is estimated at 220 W cm−2 and the model for average lamellar colony size is established as "Equation missing". The ultrasonic refinement efficiency exponentially increases as the ultrasonic vibration time with a theoretic limit maximum value of Elim = 88% and the dominating refinement mechanism by ultrasonic vibration is the cavitation-enhanced nucleation rather than cavitation-induced dendrite fragmentation.Keywords
This publication has 36 references indexed in Scilit:
- A refining mechanism of primary Al3Ti intermetallic particles by ultrasonic treatment in the liquid stateActa Materialia, 2016
- Cavitation erosion mechanism of titanium alloy radiation rods in aluminum meltUltrasonics Sonochemistry, 2016
- A novel method for grain refinement and microstructure modification in TiAl alloy by ultrasonic vibrationMaterials Science and Engineering: A, 2016
- The effect of ultrasonic processing on solidification microstructure and heat transfer in stainless steel meltUltrasonics Sonochemistry, 2015
- In situ small angle X-ray scattering investigation of ultrasound induced nucleation in a metallic alloy meltScripta Materialia, 2015
- Numerical simulation and experimental validation of SiC nanoparticle distribution in magnesium melts during ultrasonic cavitation based processing of magnesium matrix nanocompositesUltrasonics Sonochemistry, 2015
- In Situ Synchrotron X-ray Study of Ultrasound Cavitation and Its Effect on Solidification MicrostructuresMetallurgical and Materials Transactions B, 2014
- Review of high-power ultrasound-industrial applications and measurement methodsIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2014
- Power ultrasonic transducers with extensive radiators for industrial processingUltrasonics Sonochemistry, 2010
- Broad prospects for commercial application of the ultrasonic (cavitation) melt treatment of light alloysUltrasonics Sonochemistry, 2001