Three-dimensional numerical modeling of reservoir sediment release
- 1 March 2008
- journal article
- research article
- Published by Taylor & Francis in Journal of Hydraulic Research
- Vol. 46 (2) , 209-223
Abstract
For the computation of flow field and bed evolution in a water reservoir during the flushing process a fully three-dimensional hydrodynamic model, using a finite volume method to solve the Reynolds averaged Navier–Stokes equations, has been developed and combined with a three-dimensional sediment transport model. The hydrodynamic model is based the equations of mass and momentum conservation along with a standard k–e turbulence closure model. The sediment transport model is based on the equation of convection/diffusion of sediment concentration and sediment continuity equation for calculating the sediment concentration and bed level change in the reservoir flushing process, respectively. Both the hydrodynamic and sediment transport models are developed in a boundary-fitted curvilinear coordinate system. The grid is adaptive in the vertical direction, and changes according to the calculated bed level. The hydrodynamic section of the model was verified using experimental and direct numerical simulations data, and the sediment concentration calculations compare well with the experimental results. Also a physical model study was carried out to verify the results of bed evolution at the upstream of a sluice gate. Good agreement is found between bed evolution in the numerical and physical models.Keywords
This publication has 21 references indexed in Scilit:
- Fluid Mechanics in the Driven CavityAnnual Review of Fluid Mechanics, 2000
- Three-dimensional numerical modelling of bed changes in a sand trapJournal of Hydraulic Research, 1999
- Two-dimensional numerical modelling of flushing processes in water reservoirsJournal of Hydraulic Research, 1999
- Numerical modelling of three-dimensional suspended sediment for estuarine and coastal watersJournal of Hydraulic Research, 1996
- Three-dimensional numerical modeling of water and sediment flow in a sand trapJournal of Hydraulic Research, 1994
- Numerical simulation of low-Reynolds-number turbulent flow through a straight square ductJournal of Fluid Mechanics, 1992
- The Lid-Driven Cavity Flow: A Synthesis of Qualitative and Quantitative ObservationsJournal of Fluids Engineering, 1984
- Numerical study of the turbulent flow past an airfoil with trailing edge separationAIAA Journal, 1983
- A depth-averaged mathematical model for the near field of side discharges into open-channel flowJournal of Fluid Mechanics, 1978
- Über laminare und turbulente ReibungZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 1921