Do the NiTi low and constant force levels remain stablein vivo?
Open Access
- 19 February 2015
- journal article
- research article
- Published by Oxford University Press (OUP) in European Journal of Orthodontics
- Vol. 37 (6) , 656-664
Abstract
The aim was to evaluate the alteration of the deactivation forces of the most commonly used nickel–titanium wires under long-lasting oral cavity environmental influence. Randomized in vitro and in vivo trials of 540 pieces of orthodontic archwires, NeoSentalloy®, Copper NiTi® 35°C and Titanol Superelastic ® , round (0.016 inch), and rectangular (0.016×0.022 inch), were carried out. Randomization and blinding was achieved with 12-colour system that ensured encoding of key information on the tested specimens. Each of 270 patients (females, 18–20 years old, in the finishing stage of orthodontic treatment) received the piece of NiTi wire ligated piggyback, for a period of 4–6 weeks. Eventually, all samples were subjected to a three-point bending test. Data were statistically analysed at a 5 per cent significance level. In the group of the round used wires, when compared with the new ones, the deactivation force ( Fdav ) values increased significantly for Titanol Superelastic®; the NeoSentalloy® and Copper NiTi® 35°C wires did not change their values of Fdav . In the group of rectangular wires, Fdav decreased for Titanol Superelastic®, but increased for NeoSentalloy® wires. The Fdav values of the Copper NiTi® 35°C used wires practically did not change, but a remarkable increase of the standard deviation was noted. No calculations concerning effectiveness of in vivo aligning of analysed wires were made. For the purpose of a 4–6-week aligning stage, round NeoSentalloy® with a diameter of 0.016 inches seems to be the wire of choice because of the low level of Fdav . eg this trail was not registered or give the registration details. eg the protocol was not published before the trial commencement. Conflict of interest.Keywords
This publication has 12 references indexed in Scilit:
- The Importance of Force Levels in Relation to Tooth MovementSeminars in Orthodontics, 2007
- Cellular, molecular, and tissue-level reactions to orthodontic forceAmerican Journal of Orthodontics and Dentofacial Orthopedics, 2006
- Intraoral aging of orthodontic materials: The picture we miss and its clinical relevanceAmerican Journal of Orthodontics and Dentofacial Orthopedics, 2005
- Constant versus dissipating forces in orthodontics: the effect on initial tooth movement and root resorptionEuropean Journal of Orthodontics, 2003
- Photo-elastic stress analysis of initial alignment archwiresEuropean Journal of Orthodontics, 2003
- Degradation and fracture of Ni–Ti superelastic wire in an oral cavityBiomaterials, 2001
- Orthodontic wire: a continuing evolutionSeminars in Orthodontics, 1997
- The super-elastic property of the Japanese NiTi alloy wire for use in orthodonticsAmerican Journal of Orthodontics and Dentofacial Orthopedics, 1986
- Materials Science Elastic Modulus of a Triple-stranded Stainless Steel Arch Wire via Three- and Four-point BendingJournal of Dental Research, 1984
- Human tissue response to orthodontic intervention of short and long durationAmerican Journal of Orthodontics and Oral Surgery, 1942