BTFC-SBAS: A Boltzmann Time Function Constrained SBAS-InSAR Method for Nonlinear Deformation Estimation in Mining Areas
Open Access
- 25 March 2026
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 52874-52889
Abstract
Subsidence monitoring in mining areas is crucial for environmental protection in mining regions. The small baseline subset interferometric synthetic aperture radar (SBAS-InSAR) technique has proven highly effective for monitoring ground subsidence. However, solutions based on the SBAS-InSAR deformation model typically assume linear deformation, which limits their ability to capture the nonlinear, S-shaped subsidence patterns commonly observed in mining areas. A method referred to as Boltzmann time function-constrained SBAS-InSAR (BTFC-SBAS) is proposed to effectively address this limitation by introducing the Boltzmann function as a constraint into the SBAS-InSAR deformation model. This method incorporates a nonlinear functional constraint that aligns with the deformation characteristics of mining areas. Based on the small-baseline combination strategy, the BTFC-SBAS method establishes a mapping relationship between the interferometric phase of individual ground points and nonlinear subsidence by incorporating the Boltzmann function in place of the traditional linear deformation assumption. The model parameters are estimated on a per-pixel basis using a genetic algorithm, enabling accurate inversion of the nonlinear subsidence process in mining areas. Both simulated and real-data experiments based on the Mengkeqing Mine in Ordos City are conducted to verify the feasibility of the proposed BTFC-SBAS method. In the simulation experiment, six subsidence curves with different shapes are designed, and their inversion results obtained using the BTFC-SBAS, least squares (LS), and singular value decomposition (SVD) methods are compared. The BTFC-SBAS method outperforms both the LS and SVD methods under all scenarios, achieving an average RMSE of 9.833 mm, lower than those of the SVD method (17.324 mm) and the LS method (44.158 mm). In the real-data experiment, the monitoring results derived from the BTFC-SBAS and traditional SBAS methods show highly consistent spatial patterns. With levelling data as a reference, comparative analysis at four representative validation points reveals that the RMSE of the BTFC-SBAS method decreases by 25.6%, 19.9%, 30.4%, and 29.7% relative to that of the SBAS method. These findings confirm that the BTFC-SBAS method provides higher inversion accuracy and produces time-series subsidence curves that more closely match the actual measurements. Overall, the proposed method offers an effective approach for dynamic monitoring and prediction of nonlinear surface subsidence in mining areas.Keywords
Funding Information
- Shandong Provincial Postdoctoral Science Foundation (ZR2025MS535)
- Shandong Provincial Postdoctoral Science Foundation (ZR2025MS584)
- National Natural Science Foundation of China (42504011)
This publication has 28 references indexed in Scilit:
- Review of the SBAS InSAR Time-series algorithms, applications, and challengesGeodesy and Geodynamics, 2022
- Underground burning of Jharia coal mine (India) and associated surface deformation using InSAR dataInternational Journal of Applied Earth Observation and Geoinformation, 2021
- A new dynamic prediction method for surface subsidence based on numerical model parameter sensitivityJournal of Cleaner Production, 2019
- Using PS-InSAR to detect surface deformation in geothermal areas of West Java in IndonesiaInternational Journal of Applied Earth Observation and Geoinformation, 2018
- Environmental issues from coal mining and their solutionsMining Science and Technology (China), 2010
- A Combination of Space and Terrestrial Geodetic Techniques to Monitor Land Subsidence: Case Study, the Southeastern Po Plain, ItalyJournal of Geophysical Research, 2007
- The influence of time on subsidence in the Central Asturian CoalfieldBulletin of Engineering Geology and the Environment, 2007
- Modeling of atmospheric effects on InSAR measurements by incorporating terrain elevation informationJournal of Atmospheric and Solar-Terrestrial Physics, 2006
- A combined genetic algorithm and nonlinear least squares method for material characterization using elastic wavesComputer Methods in Applied Mechanics and Engineering, 2002
- Prediction of progressive surface subsidence above longwall coal mining using a time functionInternational Journal of Rock Mechanics and Mining Sciences, 2001