Nonblocking Double-Line Linear Pulse Amplifier
Author:
- 1 July 1956
- journal article
- conference paper
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 27 (7) , 475-482
Abstract
A linear amplifier with a 1.2‐μsec clipping time and a gain of 50 000 suitable for scintillation spectrometry is described. Low‐energy photoelectric peaks can be resolved under conditions in which the unwanted background has a rate in excess of 100 000 cps and has components 40 times more energetic than the desired spectrum. No shift in the energy axis is observed under these conditions. The amplifier consists of a White cathode follower preamplifier, three feedback groups, and a White cathode follower output stage. Each of the three feedback groups contains four stages, three of which are amplifiers. Blocking is eliminated by the use of grid resistors low in value compared to the preceding stage plate load resistors. This feedback group configuration is also more linear by an order of magnitude than the conventional configuration. It is shown how RLC coupling between White cathode follower halves can conserve power supply voltage. It is shown how a cable correctly terminated at the transmitting end rather than at the receiving end can eliminate the difficulties usually associated with the use of a long cable between preamplifier and main amplifier.Keywords
This publication has 5 references indexed in Scilit:
- Improved Differential Pulse-Height Selector CircuitReview of Scientific Instruments, 1956
- Improving the Linearity of Pulse AmplifiersReview of Scientific Instruments, 1954
- A Flexible Pulse Amplifier with Good Overload PropertiesReview of Scientific Instruments, 1952
- Improved Overload Response of the A-1 AmplifierReview of Scientific Instruments, 1952
- A General Purpose Linear AmplifierReview of Scientific Instruments, 1947