Chemical Mechanical Polishing of Glass Disk Substrates: Preliminary Experimental Investigation
Authors:
- 27 March 2013
- journal article
- research article
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 28 (4) , 488-494
Abstract
Glass disk substrates are used in a wide range of portable devices because of their relatively high resistance to heat and shocks compared with aluminum substrates. Chemical mechanical polishing (CMP) is an available method to eliminate residual surface defects induced by grinding/lapping to meet final product requirements. In this work, CMP experiments with a low-cost fabric cloth pad were performed to study the effects of four key process factors on the material removal rate (MRR), flatness, and surface finish of polished glass disk substrates, and to explore the feasibility to achieve high machining efficiency, sub-nanometric surface roughness, and micrometric flatness of polished glass disk substrates simultaneously under optimized CMP conditions. The experimental results and analyses reveal that the interaction of pad rotational speed and polish head rotational speed had significant effect on the roughness (Ra), down force, and the interaction of down force and pad rotational speed had significant effects on the flatness, and down force and pad rotational speed had significant effects on the MRR. After compromise and prioritization analyses are performed, a combination of the four variables, which is the combination of 50 g/cm2 for down force, 40 rpm for pad rotational speed, 20 rpm for polish head rotational speed, and 100 ml/min for slurry supply velocity, is obtained to achieve high machining efficiency, sub-nanometric surface roughness and micrometric flatness of polished glass disk substrates simultaneously.Keywords
This publication has 23 references indexed in Scilit:
- Experimental Investigations on Ice Bonded Abrasive Polishing of Copper MaterialsMaterials and Manufacturing Processes, 2010
- Prediction System of Magnetic Abrasive Finishing (MAF) on the Internal Surface of a Cylindrical TubeMaterials and Manufacturing Processes, 2010
- Planarization optimization of RF-MEMS switches with a gold membraneJournal of Micromechanics and Microengineering, 2010
- Design of UAPEF Super Finish Module on ZDC2 SurfaceMaterials and Manufacturing Processes, 2009
- Surface Conditioning Methods and Polishing Techniques Effect on Surface Roughness of a Feldspar CeramicThe Angle Orthodontist, 2007
- AN ENERGY ANALYSIS OF BELT POLISHING PROCESS AND ITS APPLICATIONS TO TIME CYCLE AND TRACKING EFFECTSMachining Science and Technology, 2007
- An Experimental Study of the Polishing Process for MgO Single Crystal SubstrateKey Engineering Materials, 2007
- Investigation of Thermo-Chemical Polishing of CVD Diamond FilmKey Engineering Materials, 2007
- A plasticity-based model of material removal in chemical-mechanical polishing (CMP)IEEE Transactions on Semiconductor Manufacturing, 2001
- Chemical mechanical polishing with fixed abrasives using different subpads to optimize wafer uniformityMicroelectronic Engineering, 2000