Effect of frequency in the 3D integration of a PZT-actuated MEMS switch using a single crystal silicon asymmetric beam
Authors:
- 1 January 2012
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Abstract
This paper presents the effect of frequency of radio frequency microelectromechanical system (RF MEMS) 3D integration with an actual device. A piezoelectric transducer (PZT)-actuated RF MEMS switch that uses a single crystal silicon asymmetric beam was designed, fabricated, and evaluated. We successfully drove a stiff beam (with spring constant >; 2,000 N/m) despite a low voltage (<;15 V). The switch lifetime was 4 × 107 cycles at low contact resistance and more than 1 × 109 cycles for the PZT actuator. The overall insertion loss and isolation were -0.3 dB and -25 dB, respectively, up to 5GHz. The effect of frequency of 3D integration was simulated with an RF MEMS switch and a ground plane placed over it. We discovered that a 3D IC comprising a control IC and an RF MEMS switch with a distance of more than 80 μm was successfully integrated.Keywords
This publication has 9 references indexed in Scilit:
- Frequency and time domain characterization of substrate coupling effects in 3D integration stack2010
- Wafer-Level Transfer Technologies for PZT-Based RF MEMS SwitchesJournal of Microelectromechanical Systems, 2010
- Influence of 3D integration on 2D interconnections and 2D self inductors HF properties2009
- Monolithically Integrated Piezomems SP2T Switch and Contour-Mode Filters2009
- Silicon RFCMOS SOI technology with above-IC MEMS integration for front end wireless applications2008
- Lifetime Measurements on a High-Reliability RF-MEMS Contact SwitchIEEE Microwave and Wireless Components Letters, 2008
- A fully wafer-level packaged RF MEMS switch with low actuation voltage using a piezoelectric actuatorJournal of Micromechanics and Microengineering, 2006
- RF MEMS2003
- A packaged, high-lifetime ohmic MEMS RF switch2003