Rheological and mechanical properties of dynamically cured poly(vinyl chloride)/nitrile butadiene rubber thermoplastic elastomers
Authors:
- 23 January 2003
- journal article
- research article
- Published by Wiley in Polymer International
- Vol. 52 (1) , 120-125
Abstract
Plasticized poly(vinyl chloride)/nitrile butadiene rubber (PVC/NBR) thermoplastic elastomers (TPEs) were dynamically cured in the melt stage with the incorporation of a semi‐efficient curing system using a Brabender Plasticorder at 150 °C and rotor speed of 50 rev min−1. Sulfur concentration was progressively increased from zero to 1 part per hundred NBR to study the effect of dynamic curing on mechanical and rheological behaviour of the TPEs. The compounds were characterized in respect of their rheological and mechanical properties. The effectiveness of dynamic curing was studied using Brabender plastograms, a moving disc rheometer and swelling index measurement. The mechanical properties investigated include tensile strength, elongation at break, modulus at 100% elongation, tear strength and hardness. The influence of thermooxidative ageing on the mechanical properties was investigated by incubating the PVC/NBR TPEs in an air oven at 80 °C for 168 h. The torque values obtained from both rheometers increased with increasing sulfur dosage, while the swelling index decreased. The significant increase in the degree of curing evidenced by the steady reduction in the swelling index provided excellent proof of the efficiency of the dynamic curing technique. Thermo‐oxidative ageing resulted in a pronounced enhancement in mechanical properties as a function of sulfur content. This observation seems to indicate that some microstructural changes, such as the formation of new crosslinks, occur in the thermo‐oxidatively aged TPEs. This trend was supported by further reduction in the swelling index of the aged TPEs.© 2003 Society of Chemical IndustryKeywords
This publication has 8 references indexed in Scilit:
- Morphology and mechanical properties of clay/styrene-butadiene rubber nanocompositesJournal of Applied Polymer Science, 2000
- Effect of polydimethylsiloxane on oxidation of isotactic polypropylenePolymer Degradation and Stability, 1999
- Dynamic vulcanisation of poly(vinyl chloride)–epoxidised natural rubber thermoplastic elastomersPlastics, Rubber and Composites: Macromolecular Engineering, 1999
- Multiphase Polymers: Blends and Ionomers1989
- Studies on NBR/PVC blendsJournal of Applied Polymer Science, 1986
- Applications of polymer blends: Emphasis on recent advancesPolymer Engineering & Science, 1984
- Engineering and molding properties of poly(vinyl chloride), acrylonitrile‐butadiene‐styrene and polyester blendsPolymer Engineering & Science, 1983
- Rubber-Thermoplastic Compositions. Part I. EPDM-Polypropylene Thermoplastic VulcanizatesRubber Chemistry and Technology, 1980