Spray Pyrolysis Synthesis of Mesoporous Lithium-Nickel-Manganese-Oxides for High Energy Li-Ion Batteries
Authors:
- Xiaofeng ZhangXZXiaofeng Zhang
- Richard L. AxelbaumRARichard L. Axelbaum
- 1 January 2012
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 159 (6) , A834-A842
Abstract
Uniform, spherical powders consisting of nanostructured Li-excess Li(1+x)Ni0.25Mn0.75O(2.25+x/2) (0.375 ≤ x ≤ 0.5) were synthesized via a spray pyrolysis approach using mixed nitrate precursors. Among the materials produced, the layered Li1.5Ni0.25Mn0.75O2.5 (R3̅m) attained a capacity of over 250 mAhg−1, which is comparable to that of the Li-excess cathode materials produced via coprecipitation. Li content was varied and found to affect the crystal structure, morphology and electrochemical properties of the materials, and the sintering temperature increased with Li content. Li2MnO3-type structures were observed on XRD diffraction patterns at high annealing temperatures for x < 0.5 due to a phase transformation. The Li2MnO3-type structures degraded the electrochemical performance of these materials due to the high kinetic barrier for Li transportation. In particular, Li1.5Ni0.25Mn0.75O2.5 annealed at 800°C and Li1.375Ni0.25Mn0.75O2.4375 annealed at 700°C predominately adopted a layered composite structure. Nano-domains (5∼10 nm) of spinel structure were observed by HR-TEM to be structurally integrated with the layered structure for Li1.375Ni0.25Mn0.75O2.4375 annealed at 700°C. Nonetheless, the layered Li1.5Ni0.25Mn0.75O2.5 materials showed the best performance in terms of capacity, cycleability and rate-capability among these materials. The superior rate capability of these materials is aided by the nano-structured morphology, which consists of nano-sized primary particles and highly porous secondary particles.Keywords
This publication has 47 references indexed in Scilit:
- Flame synthesis of 5 V spinel-LiNi0.5Mn1.5O4 cathode-materials for lithium-ion rechargeable-batteriesProceedings of the Combustion Institute, 2011
- Integrated Materials xLi[sub 2]MnO[sub 3]⋅(1−x)LiMn[sub 1/3]Ni[sub 1/3]Co[sub 1/3]O[sub 2] (x=0.3, 0.5, 0.7) SynthesizedJournal of the Electrochemical Society, 2010
- LixNi0.25Mn0.75Oy (0.5 ≤x≤ 2, 2 ≤y≤ 2.75) compounds for high-energy lithium-ion batteriesJournal of Materials Chemistry, 2009
- Lithium–manganese–nickel-oxide electrodes with integrated layered–spinel structures for lithium batteriesElectrochemistry Communications, 2007
- Effects of synthesis condition on LiNiMnO cathode material for prepared by ultrasonic spray pyrolysis methodSolid State Ionics, 2004
- Electrochemical and Structural Properties of xLi2M‘O3·(1−x)LiMn0.5Ni0.5O2 Electrodes for Lithium Batteries (M‘ = Ti, Mn, Zr; 0 ≤ x ⩽ 0.3)Chemistry of Materials, 2004
- Synthesis and electrochemical properties of Li[Li(1−2x)/3NixMn(2−x)/3]O2 as cathode materials for lithium secondary batteriesJournal of Power Sources, 2002
- Particle morphology and electrochemical performances of spinel LiMn2O4 powders synthesized using ultrasonic spray pyrolysis methodSolid State Ionics, 2002
- Lithium extraction from orthorhombic lithium manganese oxide and the phase transformation to spinelMaterials Research Bulletin, 1993
- LixCoO2 (0<x<-1): A new cathode material for batteries of high energy densityMaterials Research Bulletin, 1980