Inertia Radial Friction Welding Joint of Large Size H90 Brass/D60 Steel Dissimilar Metals
- 1 September 2012
- journal article
- research article
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 27 (9) , 930-935
Abstract
CT-130 Special Inertia Friction Welding Machine is used to weld a large size (156 mm diameter) of brass/steel by radial friction welding. Optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive spectrometer (EDS), and Vickers microhardness measurements are used to analyze the welding joint. The results show a refined grain zone near the welding interface at the brass side, which is closely related to the smaller stacking fault energy of copper. Both of Fe and Cu do diffuse to each other at the welding interface, but the diffusion density and distance are different. The microhardness distributions can be divided into four characteristic regions. The microhardness of the refined grain zone is larger than that of the base metal of brass about 20 HV, which is closely related to the fine grain strengthening, while the microhardness of the thermo-mechanical affected zone (TMAZ) is higher than that of steel base metal; it is the effect of the upper bainite and martensite formed in TMAZ.Keywords
This publication has 11 references indexed in Scilit:
- Study and Selection of the Most Appropriate Filler Materials for an Al/Cu Brazing Joint in Cooling CircuitsMaterials and Manufacturing Processes, 2011
- Intelligent Modeling for Optimization of A-TIG Welding ProcessMaterials and Manufacturing Processes, 2010
- Optimization of the GTA Welding Process Using Combination of the Taguchi Method and a Neural-Genetic ApproachMaterials and Manufacturing Processes, 2010
- Thermal Characteristics of Weld and HAZ during Pulse Current Gas Metal Arc Weld Bead Deposition on HSLA Steel PlateMaterials and Manufacturing Processes, 2010
- Diffusion bonding of 410 stainless steel to copper using a nickel interlayerMaterials Characterization, 2010
- The simulation of morphology of dissimilar copper–steel electron beam welds using level set methodComputational Materials Science, 2010
- Interface microstructure and mechanical properties of laser welding copper–steel dissimilar jointOptics and Lasers in Engineering, 2009
- A new mixed-integrated approach to control welded flashes forming process of damping-tube–gland in continuous drive friction weldingMaterials & Design (1980-2015), 2009
- Fuzzy modelling for burst pressure strength in radial friction welding of GI pipesInternational Journal of Modelling, Identification and Control, 2009
- Examination of copper/stainless steel joints formed by explosive weldingMaterials & Design (1980-2015), 2005