The role of preexisting fractures and faults during multistage hydraulic fracturing in the Bakken Formation
Authors:
- 21 May 2014
- journal article
- Published by Society of Exploration Geophysicists in Interpretation
- Vol. 2 (3) , SG25-SG39
Abstract
We performed an integrated study of multistage hydraulic fracture stimulation of two parallel horizontal wells in the Bakken Formation in the Williston Basin, North Dakota. There are three distinct parts of this study: development of a geomechanical model for the study area, interpretation of multiarray downhole recordings of microseismic events, and interpretation of hydraulic fracturing data in a geomechanical context. We estimated the current stress state to be characterized by an NF/SS regime, with SHmax oriented approximately N45°E. The microseismic events were recorded in six vertical observation wells during hydraulic fracturing of parallel wells X and Z with three unusual aspects. First, rather than occurring in proximity to the stages being pressurized, many of the events occurred along the length of well Y, a parallel well located between wells X and Z that had been in production for approximately 2.5 years at the time X and Z were stimulated. Second, relatively few fracturing stages were associated with an elongated cloud of events trending in the direction of SHmax as was commonly observed during hydraulic fracturing. Instead, the microseismic events in a few stages appeared to trend approximately N75°E, approximately 30° from the direction of SHmax. Earthquake focal plane mechanisms confirmed slip on faults with this orientation. Finally, the microseismic events were clustered at two distinct depths: one near the depth of the well being pressurized in the Middle Bakken Formation and the other approximately 800 ft above in the Mission Canyon Formation. We proposed that steeply dipping N75°E striking faults with a combination of normal and strike-slip movement were being stimulated during hydraulic fracturing and provided conduits for pore pressure to be transmitted to the overlaying formations. We tested a simple geomechanical analysis to illustrate how this occurred in the context of the stress field, pore pressure, and depletion in the vicinity of well Y.Keywords
This publication has 15 references indexed in Scilit:
- Optimizing Horizontal Completion Techniques in the Barnett Shale Using Microseismic Fracture Mapping2004
- Elastic properties of dry clay mineral aggregates, suspensions and sandstonesGeophysical Journal International, 2003
- Determination of stress orientation and magnitude in deep wellsInternational Journal of Rock Mechanics and Mining Sciences, 2003
- Microseismic Imaging of Hydraulic Fracture Complexity in the Barnett Shale2002
- Reservoir Fracture Mapping Using Microearthquakes: Two Oilfield Case StudiesSPE Reservoir Evaluation & Engineering, 1998
- Reservoir characterization using oil-production-induced microseismicity, Clinton County, KentuckyTectonophysics, 1998
- Compressive and tensile failure of inclined well bores and determination of in situ stress and rock strengthJournal of Geophysical Research, 1995
- Determining planes along which earthquakes occur: Method and application to earthquakes accompanying hydraulic fracturingJournal of Geophysical Research, 1987
- An exact effective stress law for elastic deformation of rock with fluidsJournal of Geophysical Research, 1971
- Determination of the tensile strength of rock by a compression test of an irregular test pieceInternational Journal of Rock Mechanics and Mining Sciences, 1966