An automated setup to measure the linear and nonlinear magnetic ac-susceptibility down to 4 K with higher accuracy

Authors:

Abstract
An automated stepper motor controlled ac-susceptibility setup has been developed to measure the phase resolved linear and nonlinear magnetic ac-susceptibilities of a material in the temperature range of 4 K–300 K with a frequency range of 0.1 Hz–1.5 kHz. A maximum dc-field of ±150 Oe can be superimposed with a maximum ac-field of 100 Oe in the same coil by using a homemade ac–dc superimposing circuit. The induced voltage in the detection coil is measured by a lock-in amplifier, and temperature is controlled by a temperature controller. The very common offset voltage drifting problem is resolved by implementing a two-point measurement technique at every temperature, field, and frequency using a stepper motor. Operation of the stepper motor is controlled by a homemade computer programmable driver circuit. Sensitivity of the setup is obtained around ∼10−7 emu, and relative accuracy of the measurement is much better than 0.1%. Higher harmonics can be measured with a maximum noise level of ±15 nV throughout the temperature, field, and frequency range.

This publication has 38 references indexed in Scilit: