Impact of RF Sputtering Power on AZO Thin Films for Flexible Electro‐Optical Applications
- 15 March 2021
- journal article
- research article
- Published by Wiley in Crystal Research and Technology
- Vol. 56 (4) , 2000144
Abstract
In the present work, fixed Al (2.5 wt%) doped zinc oxide (ZnO) thin films are fabricated at different radio frequency (RF) power on indium doped tin oxide‐coated polyethylene terephthalate substrate by sputtering techniques. From the X‐ray diffraction (XRD) results it has been observed that all thin films have polycrystalline nature with hexagonal structure. Stress of thin film calculated from XRD measurement is increased from −0.10 × 109 to 0.23 × 109 N m−2 with increase in RF sputtering power. The morphology analyzed by field electron microscopy is observed as irregular sphere for all samples. The estimated values of thickness are 440, 870, 913, and 1086 nm for the films grown at RF sputtering powers 130, 140, 150, and 160 W, respectively. On increasing the RF power from 130 to 160 W, the optical bandgap is decreased from 3.59 to 3.48 eV. The highest conductivity obtained is 2.43 × 102 S m−1 for the sample grown at sputtering power 160 W. The study reveals that there is an impact of sputtering power on the various properties of thin films grown on flexible substrates and these films have wide applications in flexible electro‐optical applications.Keywords
This publication has 30 references indexed in Scilit:
- On the properties of aluminium doped zinc oxide thin films deposited on plastic substrates from ceramic targetsApplied Surface Science, 2013
- Effect of sputtering power on the properties of ZnO:Ga transparent conductive oxide films deposited by pulsed DC magnetron sputtering with a rotating cylindrical targetApplied Surface Science, 2013
- Electrical and optical properties of Al-doped ZnO and ZnAl2O4 films prepared by atomic layer depositionDiscover Nano, 2013
- Flexible organic light-emitting diodes on a polyestersulfone (PES) substrate using Al-doped ZnO anode grown by dual-plasma-enhanced metalorganic deposition systemOrganic Electronics, 2013
- Roll‐to‐Roll fabrication of large area functional organic materialsJournal of Polymer Science Part B: Polymer Physics, 2012
- Optical and Structural Properties of Thermally Evaporated Zinc Oxide Thin Films on Polyethylene Terephthalate SubstratesInternational Journal of Polymer Science, 2011
- Spatial Variation in Structural, Morphological and Optical Properties of Aluminum-Doped ZnO Thin Films Grown by 30°-Incident Radio Frequency Magnetron SputteringJournal of the Electrochemical Society, 2011
- Optimization of aluminum-doped zinc oxide films deposited at low temperature by radio-frequency sputtering on flexible substrates for solar cell applicationsSolar Energy Materials and Solar Cells, 2010
- Deposition of ZnO thin film on polytetrafluoroethylene substrate by the magnetron sputtering methodMaterials Letters, 2007
- Effect of thickness on the structural, electrical and optical properties of ZnO filmsMaterials Research Bulletin, 2007