Recyclability of Asphalt Mixtures with Crumb Rubber Incorporated by Dry Process: A Laboratory Investigation
Open Access
Abstract
Semi-Dense Asphalt (SDA) mixtures are nowadays recommended for the surface layer of low noise roads in urban areas due to their optimal functional characteristics. Moreover, the use of polymer-modified bitumen (PmB) in its design results in high mechanical performance. However, this type of highly modified bitumen implies significant economic and environmental disadvantages. The polymer modification increases the production cost, involves higher mixing temperatures, and makes the recycling process of the asphalt mixtures challenging. As a potential alternative to PmB in SDA mixtures, this experimental work analyses the dry process for the incorporation of crumb rubber (CR) from waste tires. Particularly, the main objective was to study the aging effect and the recyclability of asphalt mixtures prepared in the laboratory with two different types of CR. The volumetric properties and mechanical performance of the mixtures artificially aged and rejuvenated were evaluated. The results obtained show that mixtures with CR have adequate performance, being less susceptible to aging than a conventional polymer-modified mixture. Furthermore, the rheological response of asphalt binder samples recovered from the mixtures at different aging states was analyzed. It was observed that the effect of the rejuvenator depended on the CR type, but this fact did not negatively influence the performance of the recycled mixtures.Keywords
Funding Information
- Innosuisse - Schweizerische Agentur für Innovationsförderung (25880.1 PFIW-IW)
- Ministerio de Educación, Cultura y Deporte (FPU-14/06997)
This publication has 35 references indexed in Scilit:
- The mechanical performance of dry-process crumb rubber modified hot bituminous mixes: The influence of digestion time and crumb rubber percentageConstruction and Building Materials, 2012
- Analysis of digestion time and the crumb rubber percentage in dry-process crumb rubber modified hot bituminous mixesConstruction and Building Materials, 2011
- Acoustic field evaluation of asphalt mixtures with crumb rubberApplied Acoustics, 2010
- Moisture Susceptibility of High and Low Compaction Dry Process Crumb Rubber–Modified Asphalt MixturesTransportation Research Record: Journal of the Transportation Research Board, 2010
- Rubber-modified hot-mix asphalt pavement by dry processInternational Journal of Pavement Engineering, 2009
- Effects of Various Long-Term Aging Procedures on the Rheological Properties of Laboratory Prepared Rubberized Asphalt BindersJournal of Testing and Evaluation, 2009
- Study on properties of recycled tire rubber modified asphalt mixtures using dry processConstruction and Building Materials, 2007
- Investigation of rutting performance of asphalt mixtures containing polymer modifiersConstruction and Building Materials, 2007
- Quantification of Effect of Polymer-Modified Asphalt on Flexible Pavement PerformanceTransportation Research Record: Journal of the Transportation Research Board, 2007
- The effects of rejuvenating agents on recycled aged CRM bindersInternational Journal of Pavement Engineering, 2005