Bending performance improvement of spruce LVL using adhesive-bonded flax fiber composites
Open Access
- 13 January 2026
- journal article
- research article
- Published by Springer Nature in Wood Science and Technology
- Vol. 60 (1) , 24
Abstract
Increasing pressure on high-quality timber resources like Norway spruce necessitates enhanced material efficiency, driving interest in hybrid wood products. This study evaluated flax natural fiber-reinforced polymer reinforcement for spruce laminated veneer lumber. Reinforcement composites using conventional epoxy and bio-based polyfurfuryl alcohol matrices were bonded to the lumber with structural wood adhesives (melamine-urea-formaldehyde and polyurethane); direct reinforcement using these adhesives was also tested. Mechanical properties (tensile, shear, 4-point bending, impact) were assessed, including moisture-dependent behavior at 35–85% relative humidity. Results demonstrated effective bonding of prefabricated fiber composites using both wood adhesives, yielding significant increases in the lumber’s bending stiffness and strength. Notably, the polyfurfuryl-alcohol-based composites provided the highest stiffness gains, validating its bio-based potential, while epoxy-based composites exhibited superior toughness and impact resistance. Both systems maintained significant reinforcement despite expected moisture sensitivity. Direct reinforcement attempts using the wood adhesives revealed processing limitations. Findings confirm natural fiber reinforcements as a viable strategy for enhancing wood performance, enabling advanced hybrid wood products, contributing to more efficient use of wood resources.Keywords
Funding Information
- Swiss Federal Office for the Environment (2022.08)
This publication has 29 references indexed in Scilit:
- Hybrid timber-based structures: A state of the art reviewConstruction and Building Materials, 2022
- Densified delignified wood as bio-based fiber reinforcement for stiffness increase of timber structuresComposites Part A: Applied Science and Manufacturing, 2022
- Synthesis and characterization of alkoxy silane modified polyurethane wood adhesive based on epoxidized soybean oil polyester polyolComposites Part B: Engineering, 2020
- Reinforcement of maritime pine cross-laminated timber panels by means of natural flax fibersConstruction and Building Materials, 2020
- The use of polyurethane for structural and infrastructural engineering applications: A state-of-the-art reviewConstruction and Building Materials, 2018
- Flexural strengthening of LVL beam using CFRPConstruction and Building Materials, 2017
- Reinforcement of wood with natural fibersComposites Part B: Engineering, 2013
- Natural fibre composite energy absorption structuresComposites Science and Technology, 2012
- Low-grade glued laminated timber reinforced with FRP plateComposites Part B: Engineering, 2011
- Evaluation of interfacial relaxation due to water absorption in fiber–polymer compositesComposites Science and Technology, 2006