The Influence of Centerline Segregation on the Mechanical Performance and Microstructure of X70 Pipeline Steel
Authors:
- 5 October 2018
- journal article
- research article
- Published by Wiley in Steel Research International
- Vol. 89 (12)
Abstract
Centerline segregation is an inherent phenomenon during solidification. It is controlled by optimizing the continuous casting process, but is not easy to be avoided. According to the severity of centerline segregation of the slab, it affects the mechanical properties and final microstructure of rolled strip. The objective of this paper is to study the influence of centerline segregation degree on the microstructure and mechanical properties of X70 pipeline steels. In this study, the mechanical properties of strips produced from the slabs are examined and the results show that centerline segregation is some adverse effect on Charpy impact toughness and tensile properties of hot‐rolled strips. The strips from slab with higher degree of segregation, exhibits lower Charpy impact toughness, higher tensile strength, higher microhardness. The segregated degree of slab is studied by using the method of Mannesmann, indicating that it could be up to class 3–4. Moreover, the results from Electron Probe Micro Analyzer (EPMA) shows that high level of Mn content is obtained at the centerline of strips processed from the slab with segregation degree of class 3–4. The corresponding microstructure is identified as lath martensite, which should be contributed to the undesirable mechanical properties.Keywords
Funding Information
- Ansteel Company and National key research and development plan project of China (2017YFB0304700)
This publication has 22 references indexed in Scilit:
- Transverse and z-Direction CVN Impact Tests of X65 Line Pipe Steels of Two Centerline Segregation RatingsMetallurgical and Materials Transactions A, 2016
- Quantification of bake hardening effect in DP600 and TRIP700 steelsMaterials & Design (1980-2015), 2014
- New macrosegregation criteria for quality problems in continuous casting of steelIronmaking & Steelmaking: Processes, Products and Applications, 2013
- Estimation of phase fraction in dual phase steel using microscopic characterizations and dilatometric analysisMaterials Characterization, 2013
- Effects of cold working path on strain concentration, grain boundary microstructure and stress corrosion cracking in Alloy 600Corrosion Science, 2011
- Phase Analysis of Steels by Grain-averaged EBSD FunctionsISIJ International, 2011
- Methods for Assessment of Slab Centre Segregation as a Tool to Control Slab Continuous Casting with Soft ReductionISIJ International, 2006
- Geometrically necessary dislocations and strain-gradient plasticity: a few critical issuesScripta Materialia, 2003
- Macrosegregation2001
- Our Understanding of Macrosegregation. Past and Present.ISIJ International, 2000