Comparison of Aerodynamic Effects on the Commonwealth Advisory Aeronautical Research Council (CAARC) Tall Building Model Tested in Two Wind Tunnel Laboratories
Open Access
- 15 January 2025
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 15 (2) , 811
Abstract
Wind tunnel test results can be influenced by various factors such as the blockage ratio and scaling ratio. These factors may introduce errors in the experimental outcomes, impacting the accuracy and reliability of the data obtained. This study quantitatively assesses consistency and identifies uncertainty sources to enhance result uniformity across various wind tunnel laboratories. This study conducted a systematic comparison between different wind tunnels in terms of rigid model pressure measurement wind tunnel experiments on the same Commonwealth Advisory Aeronautical Research Council (CAARC) standard tall building model. The study analyzes and discusses the results of mean and root-mean-square (RMS) wind pressure coefficients, peak factors, extreme wind pressure coefficients, probability density distributions, and base overturning force coefficients. The results indicated that in the open-circuit wind tunnel laboratory, the mean wind pressure coefficient is underestimated in the positive pressure region and overestimated in the negative pressure region. This is due to the static pressure which significantly decreases the streamwise direction within the test section, and the difference in static pressure is logarithmically proportional to the mean wind speed. Additionally, dynamic pressure is uniformly distributed along the test section axis. The inaccurate measurement of static pressure leads to these results. To address this issue, an indirect measurement method was employed to correct the static pressure results and reduce the error in the mean wind pressure coefficient to within 10%. Furthermore, differences in turbulence integral scale result in an error of up to 16% in the RMS wind pressure coefficient. Therefore, when conducting rigid model pressure measurement wind tunnel experiments, especially in open-circuit wind tunnel laboratories, careful consideration should be given to the influence of static pressure drop and integral length scale of turbulence.Keywords
Funding Information
- National Natural Science Foundation of China (52221002, 52278483, B18062, cstc2022ycjh-bgzxm0050, 2024CDJZCQ-011)
- 111 project of China (52221002, 52278483, B18062, cstc2022ycjh-bgzxm0050, 2024CDJZCQ-011)
- Natural Science Foundation of Chongqing, China (52221002, 52278483, B18062, cstc2022ycjh-bgzxm0050, 2024CDJZCQ-011)
- Fundamental Research Funds for the Central Universities (52221002, 52278483, B18062, cstc2022ycjh-bgzxm0050, 2024CDJZCQ-011)
This publication has 31 references indexed in Scilit:
- Wind tunnel simulation of wind flows with the characteristics of thousand-meter high ABLBuilding and Environment, 2019
- 3D aerodynamic admittances of streamlined box bridge decksEngineering Structures, 2019
- Investigation on wind tunnel tests of the Kilometer skyscraperEngineering Structures, 2017
- Turbulent structures, integral length scale and turbulent kinetic energy (TKE) dissipation rate in compound channel flowFlow Measurement and Instrumentation, 2017
- Field measurements of extreme pressures on a flat roof of a low-rise building during typhoonsJournal of Wind Engineering and Industrial Aerodynamics, 2012
- Bluff body aerodynamics in wind engineeringJournal of Wind Engineering and Industrial Aerodynamics, 2008
- Characteristics of wind forces acting on tall buildingsJournal of Wind Engineering and Industrial Aerodynamics, 2005
- Sensitivity of the CAARC standard building model to geometric scale and turbulenceJournal of Wind Engineering and Industrial Aerodynamics, 1988
- The effects of stream turbulence on separation bubblesJournal of Wind Engineering and Industrial Aerodynamics, 1981
- Comparison of measurements on the CAARC standard tall building model in simulated model wind flowsJournal of Wind Engineering and Industrial Aerodynamics, 1980