Synthesis of a Fine (Ta 0.8, Hf 0.2 )C Powder from Carbide or Oxide Powder Mixtures
Authors:
- 19 February 2016
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 99 (4) , 1129-1132
Abstract
Tantalum hafnium carbide ((Ta 0.8 ,Hf 0.2 )C) powders were successfully synthesized using a modified spark plasma sintering ( SPS ) apparatus with TaC/HfC or Ta 2 O 5 /HfO 2 /C starting materials. The (Ta 0.8 ,Hf 0.2 )C obtained from the carbides had a finer particle size of 220 nm, whereas those obtained from the oxides had less contamination during the milling process (0.35 wt%) than the other case. Particle coarsening of the solid‐solution phase was effectively suppressed by using a modified SPS apparatus because of the fast heating/cooling rate. High‐energy ball milling promoted a solid‐solution reaction for the formation of (Ta 0.8 ,Hf 0.2 )C by refining the size and inducing the homogeneous mixing of the starting materials. By the combination of the fast heating and high‐energy ball milling, fine tantalum hafnium carbide powders with low contamination were successfully synthesized.Keywords
Funding Information
- Ministry of Science, ICT and Future Planning
This publication has 16 references indexed in Scilit:
- Synthesis and densification of nano-crystalline hafnium carbide powderJournal of the European Ceramic Society, 2015
- Nano-TaC powder synthesized using modified spark plasma sintering apparatus and its densificationCeramics International, 2015
- Reduced-temperature processing and consolidation of ultra-refractory Ta4HfC5International Journal of Refractory Metals and Hard Materials, 2013
- Pressureless sintering of Ta0.8Hf0.2C UHTC in the presence of MoSi2Ceramics International, 2013
- Nano‐Hafnium Diboride Powders Synthesized Using a Spark Plasma Sintering ApparatusJournal of the American Ceramic Society, 2012
- Synthesis of highly dispersed super-refractory tantalum-zirconium carbide Ta4ZrC5 and tantalum-hafnium carbide Ta4HfC5 via sol-gel technologyRussian Journal of Inorganic Chemistry, 2011
- Spark plasma sintered tantalum carbide: Effect of pressure and nano-boron carbide addition on microstructure and mechanical propertiesMaterials Science and Engineering: A, 2011
- Low temperature sintering of nano-SiC using a novel Al8B4C7 additiveJournal of Materials Research, 2010
- Processing, mechanical properties and oxidation behavior of TaC and HfC composites containing 15 vol% TaSi2 or MoSi2Journal of Materials Research, 2009
- Densification and Mechanical Behavior of HfC and HfB 2 Fabricated by Spark Plasma SinteringJournal of the American Ceramic Society, 2008