Intermediate Crack Debonding in FRP-Strengthened RC Beams: FE Analysis and Strength Model
- 1 April 2007
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Composites for Construction
- Vol. 11 (2) , 161-174
Abstract
Reinforced concrete (RC) beams strengthened in flexure with a bonded fiber-reinforced polymer (FRP) plate may fail by intermediate crack (IC) debonding, in which debonding initiates at a critical section in the high moment region and propagates to a plate end. This paper first presents a finite-element (FE) model based on the smeared crack approach for concrete for the numerical simulation of the IC debonding process. This finite-element model includes two novel features: (1) the interfacial behavior within the major flexural crack zone is differentiated from that outside this zone and (2) the effect of local slip concentrations near a flexural crack is captured using a dual local debonding criterion. The FE model is shown to be accurate through comparisons with the results of 42 beam tests. The paper also presents an accurate and simple strength model based on interfacial shear stress distributions from finite-element analyses. The new strength model is shown to be accurate through comparisons with the test results of 77 beams, including the 42 beams used in verifying the FE model, and is suitable for direct use in design.Keywords
This publication has 16 references indexed in Scilit:
- Bond–slip models for FRP sheets/plates bonded to concreteEngineering Structures, 2005
- Meso-scale finite element model for FRP sheets/plates bonded to concreteEngineering Structures, 2005
- A structural engineering approach to adhesive bonding longitudinal plates to RC beams and slabsComposites Part A: Applied Science and Manufacturing, 2003
- FRP ADHESION IN UNCRACKED AND CRACKED CONCRETE ZONES2003
- Non-linear model for R/C tensile members strengthened by FRP-platesEngineering Fracture Mechanics, 2003
- Role of Bond in RC Beams Strengthened with Steel and FRP PlatesJournal of Structural Engineering, 2001
- Anchorage Strength Models for FRP and Steel Plates Bonded to ConcreteJournal of Structural Engineering, 2001
- Concrete Beams Strengthened with Externally Bonded FRP PlatesJournal of Composites for Construction, 2001
- An experimental study of the influence of plate end anchorage of carbon fibre composite plates used to strengthen reinforced concrete beamsComposite Structures, 1998
- Nonlinear analysis of reinforced concrete structuresComputers & Structures, 1977