Crack detection via strain measurements in fatigue testing
Open Access
Abstract
Fatigue cracks have appeared as a significant issue for joints and connections in existing steel structures in the last decades. Therefore, those are a major inspection and maintenance matter for any steel structure's operator. This emphasises the importance of using a reliable detection method to determine the crack size and assessing the severity of such a crack on the structural integrity of a structure. In this article, the effectiveness of strain measurement in detecting fatigue cracks in transversal non‐load carrying welded attachment subjected to out of plane axial loading is studied. Numerical analysis and experimental investigations allowed to correlate the decrease in strain measured by attached gauges to the crack depth at the weld toe. In addition, different strain evolution patterns were found during fatigue testing, and the fracture surfaces of the specimens were observed to interpret these patterns. Moreover, the crack position with respect to the weld toe surface was predicted via strain measurements.Keywords
Funding Information
- Trafikverket
- VINNOVA
- VINNOVA
- Trafikverket
This publication has 10 references indexed in Scilit:
- The efficiency of HFMI treatment and TIG remelting for extending the fatigue life of existing welded structuresSteel Construction, 2021
- Fatigue crack repair in welded structures via tungsten inert gas remelting and high frequency mechanical impactJournal of Constructional Steel Research, 2020
- Crack propagation analysis and rehabilitation by HFMI of pre-fatigued welded structuresWelding in the World, 2016
- Recommendations for Fatigue Design of Welded Joints and Components2016
- Fatigue enhancement of thin-walled, high-strength steel joints by high-frequency mechanical impact treatmentWelding in the World, 2013
- K Value Calculation of Central Crack Plane Using FRANC2DApplied Mechanics and Materials, 2012
- Fatigue behaviour of T welded joints rehabilitated by tungsten inert gas and plasma dressingMaterials & Design (1980-2015), 2011
- Fatigue behaviour of welded joints with cracks, repaired by hammer peeningFatigue & Fracture of Engineering Materials & Structures, 2004
- Fatigue crack initiation from defects at weld toes in steelInternational Journal of Pressure Vessels and Piping, 1989
- RETROFITTING FATIGUE-CRACKED JOINTS BY TIG ARC REMELTINGDoboku Gakkai Ronbunshu, 1987