Slug flow heat transfer rate in wavy walls microtubes by applying the modified volume of fluid method
- 23 September 2025
- journal article
- Published by IOP Publishing in Journal of Micromechanics and Microengineering
- Vol. 35 (9) , 095014
Abstract
This study explores the enhancement of heat transfer in heated wavy wall microtubes under slug two-phase flow, utilizing a dual-stage Lafaurie-filtered volume of fluid method in OpenFOAM to effectively capture the liquid–gas interface. The research involves a comprehensive analysis of eight different wall profiles, including triangular, trapezoidal, sinusoidal, and half-sine profiles, to identify the configuration that optimizes the average Nusselt number. Notably, the half-sine configuration proved to be the most effective, yielding approximately a 50% increase in heat transfer rate compared to slug flow (SF) in a smooth tube. Parametric investigations into wall amplitude and wavelength suggested that an amplitude of 20 µm and a wavelength of 100 µm can significantly enhance heat transfer, resulting in increases by factors of 2.5 and 11, respectively, compared to smooth-wall slug and single-phase flows. Additionally, the study examined the SF of the modified geometry to assess the interplay between heat transfer and pressure drop. Although a decrease in wavelength led to an increase in pressure drop, the associated negative impact on heat transfer rate was found to be limited. Ultimately, the research establishes empirical correlations for the average Nusselt number and the thermal performance factor, achieving prediction accuracies greater than 84%. These insights not only provide practical design principles for microchannel heat exchangers in electronics cooling applications but also pave the way for potential advancements in process intensification, thereby broadening the implications of this research in the field.Keywords
This publication has 64 references indexed in Scilit:
- Numerical simulation of the motion and interaction of bubble pair rising in a quiescent liquidApplied Ocean Research, 2023
- Flow and heat transfer analysis of MHD third‐grade fluid flow through a vertical microchannel subjected to entropy generationHeat Transfer, 2022
- Newtonian and Shear-thinning Taylor flow heat transfer in wavy micro-tubes: a numerical studyMeccanica, 2021
- Liquid film thickness of two‐phase slug flows in capillary microchannels: A review paperThe Canadian Journal of Chemical Engineering, 2021
- Magnetohydrodynamics Eyring‐Powell fluid in a vertical porous microchannel with convective boundary condition subjected to entropy generationHeat Transfer, 2020
- Numerical investigation of flow and heat transfer characteristics in smooth, sinusoidal and zigzag-shaped microchannel with and without nanofluidJournal of Thermal Analysis and Calorimetry, 2017
- Convective heat transfer and pressure drop in V-corrugated channel with different phase shiftsHeat and Mass Transfer, 2014
- Numerical study of heat transfer performance of single-phase heat sinks with micro pin-fin structuresApplied Thermal Engineering, 2013
- Forced convection and flow boiling heat transfer for liquid flowing through microchannelsInternational Journal of Heat and Mass Transfer, 1993
- Measuring the film thickness surrounding a bubble inside a capillaryJournal of Colloid and Interface Science, 1986