Silicon interposer with embedded microfluidic cooling for high-performance computing systems
Authors:
- 1 May 2015
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 05695503,p. 828-832
Abstract
A silicon interposer platform utilizing microfluidic cooling is proposed to address the off-chip signaling and cooling challenges facing future high-performance computing systems. A test vehicle with microfluidic I/Os and a micropin-fin heat sink was used to evaluate microfluidic cooling performance. De-ionized water (~20 °C) was used as the coolant. At a flow rate of 50 mL/min, the measured temperature was 55.9 °C for a power density of 97.0 W/cm 2 . Compared to air cooling, microfluidic cooling significantly improves cooling performance and thermal isolation. Moreover, 3-D integration of two silicon dice with microfluidic I/Os on a silicon interposer is demonstrated.Keywords
This publication has 7 references indexed in Scilit:
- Thermal Design and Constraints for Heterogeneous Integrated Chip Stacks and Isolation Technology Using Air Gap and Thermal BridgeIEEE Transactions on Components, Packaging and Manufacturing Technology, 2014
- Novel Electrical and Fluidic Microbumps for Silicon Interposer and 3-D ICsIEEE Transactions on Components, Packaging and Manufacturing Technology, 2014
- Novel Photo-Defined Polymer-Enhanced Through-Silicon Vias for Silicon InterposersIEEE Transactions on Components, Packaging and Manufacturing Technology, 2013
- Silicon Photonic Interconnects for Large-Scale Computer SystemsIEEE Micro, 2012
- An 8x 10-Gb/s Source-Synchronous I/O System Based on High-Density Silicon Carrier InterconnectsIEEE Journal of Solid-State Circuits, 2012
- 3D silicon integration2008
- High-performance heat sinking for VLSIIEEE Electron Device Letters, 1981