Performance analysis of cyanoacrylate bonded optical fiber 2 × 2 acoustic couplers for sensing applications
- 14 November 2024
- journal article
- research article
- Published by Optica Publishing Group in Applied Optics
- Vol. 63 (33) , 8670-8680
Abstract
In this paper the behavior of a cyanoacrylate (CA) bonded optical fiber acoustic signal coupler will be studied in detail. A stainless-steel mold was used to create a 2×2 CA coupler that transfers guided waves between two optical fibers. Four FBGs placed at each port were used to assess the repeatability, signal behavior, and performance of the coupler produced. Signal propagation through the network was mapped to determine how the initial acoustic signal traveled and subdivided through the fiber network. To examine the repeatability of the signal coupler interaction, the experiments were performed multiple times. Finally, the acoustic energy transferred through the coupler’s paths was calculated to assess the performance of the 2×2 coupler. The coupler successfully and repeatably transferred an acoustic signal from one optical fiber to another; however, the performance associated with the current coupler design was limited by relatively large excess and return losses. Improvements to the CA coupler design are then proposed from the results.Keywords
Funding Information
- Office of Naval Research (N00014-20-1-2583)
This publication has 27 references indexed in Scilit:
- Acoustic waveguide impedance matching via Helmholtz resonator mediated extraordinary acoustic transmissionAIP Advances, 2019
- Investigation of an integrated fiber laser sensor system in ultrasonic structural health monitoringSmart Materials and Structures, 2016
- Ultrasonic health monitoring in structural engineering: buildings and bridgesStructural Control and Health Monitoring, 2015
- Energy-based models for guided ultrasonic wave propagation in multi-wire cablesInternational Journal of Solids and Structures, 2015
- Smart sensing, monitoring, and damage detection for civil infrastructuresKSCE Journal of Civil Engineering, 2011
- Investigation of a fibre wave piezoelectric transducerMeasurement Science and Technology, 2006
- Ultrasound and damage detection in CFRP using fiber Bragg grating sensorsComposites Science and Technology, 2006
- Sensor application of fibre ultrasonic waveguideMeasurement Science and Technology, 2006
- Longitudinal vibrations of a silica fiber segment characterized using a fiber Bragg gratingIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1998
- Single-mode fiber ultrasonic sensorIEEE Journal of Quantum Electronics, 1982