Ductility-Equivalent Viscous Damping Relationships for Beam-to-Column Partial-Strength Steel Joints
- 21 September 2017
- journal article
- research article
- Published by Taylor & Francis in Journal of Earthquake Engineering
- Vol. 23 (5) , 810-836
Abstract
This paper seeks to contribute to the development and improvement of displacement-based design procedures, proposing improved ductility-equivalent viscous damping relationships for steel moment-resisting framed structures with dissipative beam-to-column partial-strength joints. These relationships can be used directly in procedures like the Direct Displacement-Based Seismic Design (DDBD) that uses effective stiffness, ductility-equivalent viscous damping relationships, and period-displacement relationships in a performance-based design approach. To this end, a finite element model of a steel beam-to-column sub-assemblage, characterized by an extended end-plate, is developed in ABAQUS. The model, which is validated against monotonic and cyclic experimental data obtained in previous research, is employed to carry out non-linear time-history (NLTH) analyses, using real records scaled to target several levels of ductility demand. A procedure is then proposed and applied to determine the ductility-equivalent viscous damping relationships of the sub-assemblages. The equivalent linearization technique is applied to the non-linear responses obtained in the NLTH analyses, using an elastic single degree of freedom structure and the elastic displacement spectra. The influence of joints mechanisms and of the dynamic characteristics of the structure in the equivalent viscous damping is investigated, and an expression for ductility-equivalent viscous damping is proposed. The proposed expression represents a clear improvement in relation to the existing expressions available in literature.Keywords
Funding Information
- Research Fund for Coal and Steel (RFSR-CT-2010-00029)
- Fundação para a Ciência e a Tecnologia (SFRH/BD/91167/ 2012)
This publication has 25 references indexed in Scilit:
- Equivalent viscous damping for steel concentrically braced frame structuresBulletin of Earthquake Engineering, 2011
- Displacement Reduction Factors for the Design of Medium and Long Period StructuresJournal of Earthquake Engineering, 2011
- Experimental Analysis of Bolted Steel Beam-to-Column Connections: Component IdentificationJournal of Earthquake Engineering, 2011
- Development of a Displacement-Based Design Method for Steel Dual Systems With Buckling-Restrained Braces and Moment-Resisting FramesJournal of Earthquake Engineering, 2010
- Development of a Displacement-Based Design Method for Steel Frame-RC Wall BuildingsJournal of Earthquake Engineering, 2009
- Extension of the Component Method to End-Plate Beam-to-Column Steel Joints Subjected to Seismic Loading2009
- Equivalent Damping in Support of Direct Displacement-Based DesignJournal of Earthquake Engineering, 2007
- THE LIMITATIONS AND PERFORMANCES OF DIFFERENT DISPLACEMENT BASED DESIGN METHODSJournal of Earthquake Engineering, 2003
- Non-linear analysis of the low-cycle fracture behaviour of isolated Tee stub connectionsComputers & Structures, 2002
- Time-independent constitutive theories for cyclic plasticityInternational Journal of Plasticity, 1986