Mechanical behaviour and microstructure of steel slag-based composite and its application for soft clay stabilisation
- 31 July 2017
- journal article
- research article
- Published by Taylor & Francis in European Journal of Environmental and Civil Engineering
- p. 1-16
Abstract
A new steel slag-based composite material (SSC), containing the steel slag, metakaolin and cement, was proposed to replace the traditional cement for the stabilisation of soft clays in deep mixing projects. The results obtained from unconfined compression tests showed that the metakaolin agent is crucial to the strength growth of the SSC paste. At a preferable mass ratio (Cement:Metakaolin:Steel slag=50:15:85), the SSC paste can achieve a higher strength than that of pure cement.The strength development of SSC stabilised clay is similar to traditional cemented soils, and the updated water/SSC ratio can be employed to assess the strengths based on Abrams’ law. The pore size distributions indicated that the cumulative pore volume and the macro pore size both decreased with the cement proportion increasing. The main components, such as β-C2S, γ-C2S, CSH, CaSO4·2H2O, Aft and CASH, were identified in XRD patterns and SEM images. The mechanisms were summarized as: (1) a large amount of CSH formatted the reticulate and fibrous structures, and became the binder between the unhydrated aggregates; (2) metakaolin promoted the secondary hydration and pozzolanic reaction of cement and steel slag, resulting in the further enhancement of the binders.Keywords
Funding Information
- National Natural Science Foundation of China (grant number 41572280, grant number 51378117)
- Jiangsu Province (grant number 2014-XCL-003)
This publication has 30 references indexed in Scilit:
- Assessment of strength development in blended cement admixed Bangkok clayConstruction and Building Materials, 2011
- Strength Development in Cement Admixed Bangkok Clay: Laboratory and Field InvestigationsSoils and Foundations, 2011
- Investigation on phosphogypsum–steel slag–granulated blast-furnace slag–limestone cementConstruction and Building Materials, 2010
- Investigation on the application of steel slag–fly ash–phosphogypsum solidified material as road base materialJournal of Hazardous Materials, 2009
- Use of low CaO unprocessed steel slag in concrete as fine aggregateConstruction and Building Materials, 2009
- Utilization of steel slag for Portland cement clinker productionJournal of Hazardous Materials, 2008
- An overview of utilization of slag and sludge from steel industriesResources, Conservation and Recycling, 2007
- Reactive pozzolana from Indian clays—their use in cement mortarsCement and Concrete Research, 2006
- Assessment of strength development in cement-admixed high water content clays with Abrams' law as a basisGéotechnique, 2003
- Potential beneficial uses of steel slag wastes for civil engineering purposesResources, Conservation and Recycling, 1991