Joint Axis Estimation for Fast and Slow Movements Using Weighted Gyroscope and Acceleration Constraints
Open Access
- 1 July 2019
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
Abstract
Sensor-to-segment calibration is a crucial step in inertial motion tracking. When two segments are connected by a hinge joint, for example in human knee and finger joints as well as in many robotic limbs, then the joint axis vector must be identified in the intrinsic sensor coordinate systems. There exist methods that identify these coordinates by solving an optimization problem that is based on kinematic joint constraints, which involve either the measured accelerations or the measured angular rates. In the current paper we demonstrate that using only one of these constraints leads to inaccurate estimates at either fast or slow motions. We propose a novel method based on a cost function that combines both constraints. The restrictive assumption of a homogeneous magnetic field is avoided by using only accelerometer and gyroscope readings. To combine the advantages of both sensor types, the residual weights are adjusted automatically based on the estimated signal variances and a nonlinear weighting of the acceleration norm difference. The method is evaluated using real data from nine different motions of an upper limb exoskeleton. Results show that, unlike previous approaches, the proposed method yields accurate joint axis estimation after only five seconds for all fast and slow motions.Keywords
All Related Versions
This publication has 14 references indexed in Scilit:
- Using Inertial Sensors for Position and Orientation EstimationFoundations and Trends® in Signal Processing, 2017
- Automatic anatomical calibration for IMU-based elbow angle measurement in disturbed magnetic fieldsCurrent Directions in Biomedical Engineering, 2017
- Exploiting kinematic constraints to compensate magnetic disturbances when calculating joint angles of approximate hinge joints from orientation estimates of inertial sensors2017
- Experimental evaluation of joint position estimation using inertial sensors2017
- Evaluation of the accuracy in the determination of the center of rotation by magneto-inertial sensors2016
- Indoor Positioning Using Ultrawideband and Inertial MeasurementsIEEE Transactions on Vehicular Technology, 2015
- Reviews on Various Inertial Measurement Unit (IMU) Sensor ApplicationsInternational Journal of Signal Processing Systems, 2013
- Joint axis and position estimation from inertial measurement data by exploiting kinematic constraints2012
- Connecting a Human Limb to an ExoskeletonIEEE Transactions on Robotics, 2012
- Who Invented the Delta Method?The American Statistician, 2012