The Determination of Sulfur and Chlorine in Used Oil by X-Ray Fluorescence, ICP and Ion Chromatography
Authors:
- Douglas S. KendallDKDouglas S. Kendall
- Stanley D. SchoenwaldSSStanley D. Schoenwald
- Scott HendricksSHScott Hendricks
- 1 January 1995
- journal article
- research article
- Published by SAGE Publications in Hazardous Waste and Hazardous Materials
- Vol. 12 (4) , 373-380
Abstract
Methods for the determination of total sulfur and chlorine in used oil were evaluated and compared using actual waste oil samples. Oxygen bomb combustion was followed by either ion chromatographic determination of sulfate and chloride or determination of sulfur by inductively coupled plasma (ICP) optical emission spectroscopy. Total sulfur and chlorine were determined by X-ray fluorescence (XRF) spectroscopy in samples prepared by fivefold dilution in mineral spirits. Oxygen bomb combustion and XRF gave results with good precision, and, by comparison with each other, very little bias. Problems with the settling of particulates in the XRF analyses were largely overcome by using a thin layer method for sample presentation to the spectrometer. Due to the presence of particulates and emulsified water, the determination of sulfur and chlorine in used oil is more difficult than in pristine oil. Bomb combustion, when followed by IC or ICP, and XRF have been shown to be satisfactory analytical methods for determining total sulfur and chlorine in used or waste oil.Keywords
This publication has 7 references indexed in Scilit:
- Quantitative XRF Determinations of Additive Elements in Greases for Manufacturing SpecificationsAdvances in X-ray Analysis, 1992
- Determination of trace elements in oils and greases with total reflection X-ray fluorescence: sample preparation methodsSpectrochimica Acta Part B: Atomic Spectroscopy, 1991
- Determination of sulfur, nickel and vanadium in fuel and residual oils by x-ray fluorescence spectrometryAnalytica Chimica Acta, 1987
- Determination of wear metals in oil using energy dispersive x-ray spectrometryAnalytica Chimica Acta, 1986
- Determination of sulphur in oils by X-ray fluorescence using a thin layer solidified with waxThe Analyst, 1983
- Analysis of used lubricating oils for wear metals by wavelength dispersive X-ray fluorescence spectroscopyThe Analyst, 1983
- Determination of sulfur and heavy metals in crude oil and petroleum products by energy-dispersive x-ray fluorescence spectrometry and fundamental parameter approachAnalytical Chemistry, 1981